Previous Article | Next Article ![]()
Infection and Immunity, October 2003, p. 6004-6011, Vol. 71, No. 10
0019-9567/03/$08.00+0 DOI: 10.1128/IAI.71.10.6004-6011.2003
Copyright © 2003, American Society for Microbiology. All Rights Reserved.
Departments of Medicine,1 Pathology, School of Medicine,3 Departments of Environmental Health Sciences,4 Molecular Microbiology and Immunology,5 International Health,2 Epidemiology, Bloomberg School of Public Health, The Johns Hopkins University, Baltimore,6 Department of Aerobiology and Product Evaluation, U.S. Army Medical Research Institute of Infectious Diseases, Fort Detrick, Frederick, Maryland,8 Department of Pathology, George Washington University Medical Center, Washington, D.C.7
Received 26 November 2002/ Returned for modification 11 February 2003/ Accepted 2 July 2003
|
|
|---|
|
|
|---|
The rabbit model offers certain advantages over both the murine and guinea pig models. First, when infected with M. tuberculosis or Mycobacterium bovis, rabbits have a spectrum of disease that represents many of the specific stages of human disease. In general, rabbits are able to contain disease caused by virulent M. tuberculosis. Over time, the number of pulmonary bacilli decline and the lesions regress (22). With M. bovis infection, rabbits form chronic fibrosing pulmonary cavities (8). Both of these are prominent features in human disease. Finally, rabbit lung granulomas, with their caseous centers, closely resemble the human granuloma. Lurie and colleagues have found a remarkable similarity between the spectrum of rabbit tuberculosis and that found in humans (23).
In the era before genomics and before the biochemical property differences were elucidated, the rabbit infection model was used to differentiate between M. bovis and M. tuberculosis because of the remarkable difference in virulence for these animals (39). More recently, rabbits have been used to examine the difference in relative pathogenicities between M. tuberculosis strains CDC1551 and H37Rv. Tubercles from animals infected with CDC1551 are smaller and contain fewer bacilli than those infected with H37Rv (3).
In two recent reports, genomic deletion analysis was used to propose a new evolutionary schema for the M. tuberculosis complex of organisms (6, 29). The conclusion reached by both groups of authors was that successive loss of DNA from M. tuberculosis gave rise to M. bovis as well as the other members of the M. tuberculosis complex. Other genetic approaches such as bacterial artificial chromosome analysis have also been used to identify differences among the members of the M. tuberculosis complex (4, 5, 15). More information on the relative pathogenicity in vivo needs to be correlated with the genomic content of individual strains.
This report describes a series of infections in rabbits with three different strains of M. tuberculosis: Erdman, H37Rv, and CDC1551. In general, with increasing dose of any strain, more inhaled bacteria are required to produce one grossly visible tubercle at 5 weeks. Of the three strains, the Erdman strain appears to be the most virulent for rabbits, requiring the lowest number of inhaled bacilli to make one tubercle. This strain also has the greatest spectrum of disease at 16 to 22 weeks after initial aerosol infection. The Erdman strain's ability to produce coalescing lesions with occasional cavities by fewer inhaled bacteria compared with H37Rv led us to analyze its genomic DNA. Genomic analysis of the Erdman strain showed differences in the RD6 deletion region that is rich in PPE genes and that has been shown previously to be absent in many strains of M. bovis and in a few strains of M. tuberculosis (6). Further analysis of this region revealed interesting differences between strains.
|
|
|---|
Animals and infection. Specific pathogen-free New Zealand White rabbits (2.5 kg; female) were purchased from Covance Research Products, Inc. (Denver, Pa.), maintained in standard cages in biosafety level 3 conditions, and fed commercial rabbit chow and water ad libitum. All animals were maintained in accordance with protocols approved by the institutional animal care and use committees of The Johns Hopkins University, George Washington University, and the U.S. Army Medical Research Institute of Infectious Diseases (8). Just prior to infection, the volume of air that each rabbit breathed per minute was calculated from the per-minute ventilation, respiratory rate, and tidal volume of air inhaled by each rabbit (measured in a whole-body plethysmograph) according to Guyton's formula by using Pulmonary Mechanics computer model no. 6 software (Buxco Electronics, Sharon, Conn.) (17). Animals were infected by aerosol at the U.S. Army Medical Research Institute of Infectious Diseases by using a nose-only system where aerosols are generated in a class III biosafety glove box cabinet under negative pressure or in a completely contained biosafety level 4 air-locked area. The biosafety level 3 exposure chamber was a 16-liter Plexiglas box with one side containing a circular latex dam with a cutout into which the nose and mouth of the rabbit were inserted (41). The aerosol was generated with a Collison nebulizer containing bacilli suspended in the 10% dilution of oleic albumin complex. The aperture of the nebulizer disperses clumps of bacilli into units of one to three bacilli. Throughout the 10-min exposure period, a one-fourth-inch, stainless steel sampling port placed in the exposure chamber box at the level of the animal's nose was used to collect samples into 10% oleic albumin complex containing antifoam A (Sigma Chemical Co., St. Louis, Mo.) with an all-glass impinger (AGI-30; Ace Glass, Inc., Vineland, N.J.). Rabbits were placed in a loose-fitting canvas bag and then gently hand held. The oleic albumin complex solutions containing the aerosolized bacteria were cultured at various dilutions on 7H10 Middlebrook agar (Fisher Scientific). For each rabbit, the number of viable bacilli inhaled was calculated based on the volume of inhaled air during exposure and the number of CFU cultured from the impinger samples per milliliter. The animals were housed in biosafety level 3 facilities at the George Washington University Medical Center immediately following infection. Four weeks after infection, a 1:30 dilution of 4x Old Tuberculin concentrate (Wyeth Lederle, Pearl River, N.Y.) was injected intradermally, and 2 days later the resulting skin reaction was measured with calipers. Delayed-type hypersensitivity responses were quantified by measuring the skin fold thickness of the indurated skin minus the double skin fold thickness of normal unaffected skin and then multiplying by the width and length of the indurated area. At 5 weeks after infection, the rabbits were euthanized with intravenous pentobarbital (Euthasol; NLS Animal Health, Baltimore, Md.) and the number of grossly visible primary tubercles in the lungs was counted by Lurie's tubercle count method (12, 24). Other animals were sacrificed at later time points as noted in Results.
Microarrays. A set of 70-bp oligonucleotides representing all 4,295 open reading frames of H37Rv (Qiagen Operon Technologies, Alameda, Calif.) were spotted in duplicate on glass slides coated with poly-L-lysine in a 384-well-format arrayer (GeneMachines, San Carlos, Calif.). Bacterial genomic DNA prepared by previously established methods (19) was labeled with either Cy3 or Cy5 probes (Amersham Pharmacia, Piscataway, N.J.) using the aminoallyl labeling method (34). The slides were scanned with an Axon scanner, and the Genepix (Union City, Calif.) array viewing software system was used to define and quantify spot intensities. Erdman genomic DNA was compared with that of CDC1551. Reverse labeling was performed to confirm the hybridization of individual spots. As each 70-mer was spotted in duplicate and reverse labeling was performed, four readings were available for each gene. A positive signal was defined as a greater than 20-fold difference in fluorescence hybridization signals between the two strains.
Southern blotting and PCR. Reaction mixtures contained 0.5 mM concentrations of deoxynucleoside triphosphates, 5 µl of Expand High Fidelity 10x buffer, 1 µM primers, 0.75 µl of Expand HF polymerase, 500 µM magnesium chloride, and sterile distilled water in a final volume of 50 µl. Thermal cycling was performed in thin-walled tubes on a Mastercycler (Eppendorf, Westbury, N.Y.) with an initial denaturation step of 96°C for 10 min, followed by 30 cycles of 94°C for 15 s, 59°C for 30 s, and 72°C for 20 s. See Table 3 for the primers used to amplify intragenic regions of the genes in the RD6 region.
|
View this table: [in a new window] |
TABLE 3. Detection of genes in M. bovis strains
|
Statistical analysis. All comparisons of nonnormally distributed continuous data were analyzed with the Wilcoxon rank sum test using SAS version 8.2 (SAS Institute, Cary, N.C.).
|
|
|---|
|
View this table: [in a new window] |
TABLE 1. Results for rabbits given aerosol doses of different M. tuberculosis strains
|
4.8). The Erdman strain produced a larger number of tubercles than did the same inhaled dose of strain H37Rv (averages of 163 ± 25 tubercles and 72 ± 12 tubercles, respectively; P = 0.011). Figure 1 shows the relationship between the number of tubercles and the log10 inhaled dose. All experiments with H37Rv and Erdman log-phase bacilli were used in this analysis. Inhaled frozen-thawed aerosols were excluded in the data for Fig. 1 as were experiments performed with CDC1551. The slope suggests a trend towards a widening of this virulence difference at higher doses (Fig. 1).
![]() View larger version (14K): [in a new window] |
FIG. 1. Relative virulence of our M. tuberculosis Erdman and H37Rv strains. Each point represents the mean tubercle count of six rabbits given the same aerosol dose. The slopes of the lines show the number of visible tubercles as a function of the number of bacilli inhaled. The Erdman strain (dashed line) produced more tubercles per bacilli inhaled than did the H37Rv strain (solid line).
|
This was also true for the Erdman strain, the most virulent strain in our study (Table 2). In frozen-thawed M. tuberculosis Erdman aerosolization experiments, the mean number of bacilli required to produce one grossly visible tubercle ranged from 843 to 3,489 (Table 2). In contrast, in animals infected with log-phase bacilli, the average number of bacilli needed to produce one tubercle ranged from 419 to 827 depending on the aerosolized dose (Table 2) (Fig. 1). Furthermore, there was a statistically significant difference between the numbers of inhaled bacilli required to form one tubercle in both the higher (3,489 versus 827, P < 0.01) and lower (843 versus 419, P = 0.04) dose groups between frozen-thawed and log-phase bacilli in the inoculum.
|
View this table: [in a new window] |
TABLE 2. Aerosol experiments with log-phase or frozen-thawed M. tuberculosis Erdman
|
Results of the two frozen-thawed aerosol experiments and those of the three log-phase aerosol experiments were compared using the Wilcoxon rank sum test. There was a statistically significant 1-log difference in the inhaled dose between the two groups aerosolized with frozen-thawed bacilli (experiments 8b and 11) and the two groups aerosolized with log-phase, actively growing bacteria (experiments 7, 8a, and 9) (P < 0.01). In the animals in experiment 11 infected with 1-log-fewer frozen bacteria, the tubercle counts were significantly lower than those in rabbits in experiment 8b (P < 0.01), as expected, and the tubercle diameters were significantly larger (P < 0.01). For those animals infected with log-phase bacteria, however, the tubercle counts showed more variability, with insignificant differences in both tubercle counts and diameters despite the 1-log difference in inhaled dose.
M. tuberculosis Erdman spectrum of disease. At 16 to 18 weeks after aerosol infection with frozen-thawed Erdman bacilli, the spectrum of disease varied greatly among the 15 rabbits necropsied. Seven (47%) had nearly or completely healed lesions, three had multiple, small caseous tubercles, and three had large coalescing lesions. Finally, two animals had large caseous lesions: one had early cavities filled with solid caseum and one had multiple large caseous lesions, some of which had frank liquefaction (Fig. 2).
![]() View larger version (125K): [in a new window] |
FIG. 2. Lungs from outbred New Zealand White rabbits at 16 to 18 weeks after aerosol infection with M. tuberculosis Erdman strain. Panels show lungs completely healed of disease with no visible tubercles (A), multiple coalescing lesions scattered throughout the lungs (B), multiple large coalescing lesions, some with early cavity formation (C), and a large cavitary lesion (arrow) filled with liquefied caseum (inset) and multiple coalescing lesions (D).
|
Southern blot data are presented in Fig. 3 and 4. Using three different restriction enzymes and a 244-bp Rv3424c intragenic probe, two bands were obtained for H37Rv. A BLAST search of the Rv3424c sequence against the H37Rv sequence showed an exact match not only for the annotated Rv3424c gene but also for a 208-bp region (with infrequent mismatches across the remaining 152 bp) located between Rv3428c and PPE59. The truncated copy of Rv3424c in H37Rv putatively codes for a 73-amino-acid protein that is not annotated in the genome. CDC1551 has only one copy, denoted MT3532.2, in the database. The Erdman strain has three copies of Rv3424c (one truncated as in H37Rv). Three PPE genes (PPE57 to PPE59) in the RD6 region of the H37Rv genome bear remarkable homology. PPE57 and PPE58 are absent in CDC1551, as was previously reported (14). The Erdman strain appears to contain segments in the RD6 region similar to both H37Rv and CDC1551. With both PvuII and BglII digests in the Erdman strain genomic DNA, Rv3424c hybridized to three fragments with the sizes predicted for H37Rv and CDC1551 (
4.0, 2.9, and 1.9 kb and
5.5, 3.2, and 2.2 kb, respectively). Other genomic DNA digests with PmlI, PmlI/NheI, and KpnI were also performed and Southern blotted, and the results agreed with the putative map presented in Fig. 4. Further investigation of Rv3428c, an IS1532 transposon that may be truncated, is needed as we were unable to obtain PCR products of this region.
![]() View larger version (86K): [in a new window] |
FIG. 3. Southern blot analysis with PvuII-cut genomic DNA probed with a 244-bp fragment of Rv3424c. Lane 1, CDC1551; lane 2, Erdman; lane 3, H37Rv; lane 4, M. bovis BCG Pasteur.
|
![]() View larger version (23K): [in a new window] |
FIG. 4. Genetic map of the RD6 region in M. tuberculosis strains H37Rv, CDC1551, and Erdman. The hybridization site of the 244-bp Rv3424c intragenic probe is shown as a thick bold line underneath each linearized genome. The RD6 region is fully present in H37Rv and is shown as an arrow extending from Rv3425 to Rv3428c. PPE family genes are shown in grey. An area that is not fully characterized in Erdman is indicated by an asterisk.
|
|
|
|---|
For example, the HN878 strain from an epidemic in Houston, Tex., was shown to be hypervirulent in a mouse model of tuberculosis (27). Subsequently, this strain was tested in a rabbit meningitis model where organisms were injected directly into the cerebrospinal fluid. HN878 had the highest bacillary load, the greatest extrameningeal dissemination, and the most severe clinical symptoms. There was also evidence of high organism burdens and an early cavitary response in the lungs compared with strains H37Rv and CDC1551, indicating continuous extrameningeal seeding (L. Tsenova, A. Bergtold, B. Mangaliso, V. H. Freedman, and G. Kaplan, Abstr. 36th Tuberc. Leprosy Res. Conf., p. 134, 2001). Although genotypic differences in the organism may be important to the pathogenicity seen in both mice and rabbits, Tsenova and colleagues showed in the murine model that an earlier Th1 response may be the key to the host's ability to limit disease severity (26). CDC1551 induced a rapid, vigorous interleukin 12-driven Th1 cytokine response and was cleared, whereas HN878 had a reduced response and resulted in a more severe disease phenotype. Due to limited cytokine reagents in the rabbits, the specific evolution of Th1 cytokines could not be studied, but the HN878 strain produced a later overzealous plasma tumor necrosis factor response that appeared to correlate with the worsened clinical status.
The relative pathogenicity of a specific strain seems to be related to its genotype, the way in which it was cultivated, and the response of the host. Because it is relatively resistant to infection caused by M. tuberculosis and because it has a wide range of disease manifestations (bacillary clearance to cavitation), the rabbit presents a unique niche in the menu of animal testing systems. Ultimately, the ability to correlate the clinical manifestations of a human isolate with those in the rabbit would be a powerful tool to study both the host response and the strain genotype's contribution to the pathogenic outcome (28).
With the genome sequencing of strains in the M. tuberculosis complex, our understanding of fundamental genetic differences among the species has broadened. It is now clear that M. bovis differentiated phylogenetically from M. tuberculosis and that the deletions in the genome of M. tuberculosis led to an expanded host range for M. bovis (6, 29). With M. microti, however, other deletions led to its attenuation for most animal species (except for the vole) and to a loss of lung tropism (4, 25). Kato-Maeda et al. used high-density oligonucleotide arrays to understand genetic differences between strains of M. tuberculosis (20). Their findings concurred with those of others showing that many deletions are mediated by insertion sequences (16, 18). These authors also concluded that increasing the number of genes deleted may lead to an attenuation of virulence and a decreased ability to produce cavities.
The rabbit model of tuberculosis has historically been an important way to differentiate between M. tuberculosis and M. bovis. Fewer than 30 inhaled bacilli of M. bovis results in a progressive infection that eventually leads to the death of the rabbit (8, 9, 33). One to 2 orders of magnitude more inhaled bacilli of H37Rv M. tuberculosis are needed to create one visible pulmonary tubercle at 5 weeks (3, 10, 23, 24). However, the majority of these rabbits recovered, as is the case with humans.
With our bacillary strains, we found that fewer inhaled bacilli of the Erdman strain than of the H37Rv strain were required to produce a visible lesion in commercial rabbits at 5 weeks. With H37Rv infection, most of the lesions healed in 4 to 6 months (1), whereas only half of the rabbits infected with the Erdman strain had healed lesions at this time. Several of the other rabbits had large, caseous, coalescing tubercles, consistent with progressive disease, with two of the rabbits having cavitary lesions. In an attempt to understand the genomic basis of this difference, we used an H37Rv-based microarray to determine whether the Erdman strain contained deletions relative to H37Rv. We found that Rv3428c in deletion region 6 (RD6) was absent in the Erdman strain. The RD6 region is known to be deleted in CDC1551 and in many strains of M. bovis (6). We did not find any of the other large deletion regions described to be associated with M. bovis despite the M. bovis-like pattern of disease that the Erdman strain produced in some of the rabbits. Microarray analysis using an H37Rv-based array would not detect regions deleted from M. tuberculosis after its divergence from M. bovis strains (e.g., TbD1) (6). Furthermore, rearrangements and point mutations, insertions, and small deletions could not be detected with this methodology (14). Because of these known limitations of microarray-based genomic analysis, we used traditional Southern blotting mapping techniques and PCR to substantiate the microarray data. We found that Erdman contained a segment identical to H37Rv interrupted by a segment identical to CDC1551. Therefore, the Erdman strain has four copies of PPE genes in this region and three copies of Rv3424c (one truncated). Furthermore, PPE57 appears to have a nonsynonymous substitution (T128A). It is noteworthy that a region with both transposons and multiple PPE genes should be so diverse among the three strains. The PPE gene family encoding acidic, glycine-rich proteins is thought to be expressed on the extracellular surface of M. tuberculosis. Others have speculated on the role of these proteins as potential antigens for host immunity, thereby implicating a role in virulence since PE and PPE genes have the highest rates of synonymous and nonsynonymous substitutions when M. tuberculosis whole genomes are compared (14). PE and PPE family proteins have also been shown to be immunogenic in a human peripheral blood mononuclear cell model and therefore may be useful in vaccine discovery (35).
Several interesting points about aerosol infection of rabbits emerge from our study. First, at higher inhaled doses of any M. tuberculosis strain, more bacilli are usually required to produce one visible lesion at 5 weeks. One possible explanation for this is that higher inhaled doses may provide a larger antigenic stimulus that can hasten acquired immunity and thereby prevent more microscopic tubercles from reaching visible size. Second, there is a significant difference between viable, frozen-thawed bacilli and log-phase, actively growing bacilli in the aerosol dose required to produce an equal number of grossly visible primary pulmonary tubercles. A greater number of frozen-thawed bacilli than log-phase bacilli are required. This may be because frozen-thawed bacilli are in lag phase and are therefore more easily destroyed by the highly activated alveolar macrophage population than are actively growing log-phase bacilli. Interestingly, the tuberculin skin test responses of the two groups of rabbits given the same inhaled dose of bacilli (frozen thawed or log phase) were not different, suggesting that once grossly visible tubercles were established in the host little difference in the two types of infecting bacilli was still present.
In conclusion, aerosol infection with M. tuberculosis allows us to determine the relative pathogenicities of different bacillary strains in the rabbit model of tuberculosis. With log-phase actively growing bacilli, the wide range of the infectious dose required to form one grossly visible pulmonary tubercle 5 weeks after infection allows us to assess the relative pathogenicities of various strains. The finding of a long-term outcome with increased propensity towards cavitary disease with some strains should be followed-up with in-depth studies of clinical strains to determine whether the rabbit outcomes mirror that of humans. Genetic analysis revealed heterogeneity in the RD6 region between Erdman and H37Rv which may account, in part, for the different patterns of disease resulting from modulation of the host response to infection that these strains produce in rabbits. Further studies of pathogenicity in the rabbit model produced by different strains within the M. tuberculosis complex along with their genotypes may elucidate specific genes that are critical in different stages of human disease.
We gratefully acknowledge the animal care provided by Walter Johnson and Mike Manion at George Washington University Medical Center.
|
|
|---|
/ß. Proc. Natl. Acad. Sci. USA 98:5752-5757.
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»