Previous Article | Next Article ![]()
Infection and Immunity, August 2003, p. 4341-4350, Vol. 71, No. 8
0019-9567/03/$08.00+0 DOI: 10.1128/IAI.71.8.4341-4350.2003
Copyright © 2003, American Society for Microbiology. All Rights Reserved.
Department of Microbiology and Immunology,1 Program in Bioinformatics and Proteomics/Genomics, Medical College of Ohio, Toledo, Ohio 43614-58062
Received 7 March 2003/ Returned for modification 24 April 2003/ Accepted 8 May 2003
|
|
|---|
|
|
|---|
A vaccine that provides protection against M. catarrhalis is highly desirable due to this substantial morbidity as well as the growing concern over antibiotic resistance observed in clinical isolates (30). Toward this end, current research is focused on the identification of potential antigens with emphasis on the outer membrane proteins (OMPs) (26, 34, 35). While M. catarrhalis OMPs with a wide variety of functions have been identified, adhesins are particularly attractive vaccine candidates because they are surface-exposed antigens. Furthermore, adhesins generally play a crucial role in colonization and pathogenesis. For many bacteria, adherence to epithelial surfaces contributes to the evasion of host clearance mechanisms (4, 25, 59). Previous studies with M. catarrhalis have identified UspA1 (32, 36), UspA2 (2, 8, 36), Hag (14, 15, 17, 19, 24, 45, 47; M. M. Holm and E. R. Lafontaine, unpublished data), lipooligosaccharide (24), OMPCD (49), and UspA2H (32) as potential adhesins. Of these, only UspA1 and UspA2H have been directly shown to mediate adherence to human cells (32, 36). However, while UspA1 is expressed by virtually all strains tested to date, only
20% of clinical isolates contain an uspA2H gene (32, 37).
The present study describes the identification of the novel M. catarrhalis OMP McaP. While this protein was identified based on its ability to function as an adhesin, we report that it also displays the enzymatic activity of an esterase and a phospholipase B (PLB).
|
|
|---|
|
View this table: [in a new window] |
TABLE 1. Bacterial strains and plasmids
|
The 16HBE14o- polarized human bronchial cell line (9) was cultured in Eagle's minimum essential medium with Earle's salts (Cellgro) supplemented with 2 mM L-glutamine (Cellgro), 1.5 g of sodium bicarbonate (Cellgro)/liter, 10% (vol/vol) fetal bovine serum (GIBCO), and 0.9 g of glucose/liter in an atmosphere of 92.5% air-7.5% CO2. All plastic ware used for the culture of 16HBE14o- cells was coated with a solution containing human fibronectin (BD BioSciences) and type 1 bovine collagen (BD BioSciences), as previously described (9). When grown under these conditions, these bronchial cells are polarized.
Recombinant DNA techniques. Standard molecular biology techniques were performed as previously described (52). M. catarrhalis genomic DNA was purified with the Invitrogen Easy-DNA kit. The library of M. catarrhalis O35E.ZCS DNA fragments was generated with the CopyControl Fosmid library production kit (Epicentre) according to the manufacturer's instructions. Plasmid DNA was purified using the QIAprep Spin miniprep system (Qiagen) and mutagenized with a transposon by using the EZ::TN <KAN-2> insertion kit (Epicentre). Plasmid DNA and ligation mixtures were introduced into E. coli by chemical transformation as described previously (52). The method used to electroporate M. catarrhalis cells has been reported elsewhere (Holm and Lafontaine, unpublished). Southern hybridization experiments were performed using the North2South chemiluminescent hybridization and detection system (Pierce). An 0.7-kb SmaI DNA fragment containing the nonpolar Kanr resistance cartridge from the plasmid pUC18K1 (38) was used as a probe in some of these experiments. The 2.1-kb mcaP-specific DNA probe was obtained by PCR with the oligonucleotide primers P1 and P2 (see below).
PCR. Amplicons used for cloning, construction of isogenic mutants, and sequencing of the M. catarrhalis strain O35E mcaP gene were generated with Pfu DNA polymerase (Stratagene). Other DNA fragments were amplified using Taq DNA polymerase (Invitrogen).
Cloning of the M. catarrhalis O35E mcaP gene in E. coli. An amplicon of 2.1 kb containing the mcaP gene from strain O35E was generated with the oligonucleotide primers P1 (5'-CGCAATAAAGATCACCATGCTTG-3') and P2 (5'-CGGGATCCCGCTGACACATTGCATTGATAAA-3') (BamHI site underlined). This PCR product was digested with BamHI and ligated into the vector pBR322, which had been digested with the endonucleases EcoRV and BamHI. This ligation mixture was introduced into E. coli TOP10, and transformants were selected for resistance to ampicillin. Colonies were then streaked onto LB agar plates supplemented with 1% (vol/vol) Tween 80 to identify clones expressing lipolytic activity. Lipolysis of Tween 80 generates an insoluble precipitate that forms a halo around the colony. This approach yielded the recombinant plasmid pJTmcaP, which expresses the O35E mcaP gene product. Both strands of this mcaP insert were sequenced to verify that no mutations were introduced during PCR.
Construction of M. catarrhalis isogenic mutants. The plasmid pJTmcaP was linearized with PmeI (New England Biolabs) and ligated with an 0.7-kb SmaI (New England Biolabs) DNA fragment containing the nonpolar Kanr cassette from the plasmid pUC18K1 (38). This ligation mixture was introduced into E. coli TOP10, and transformants were selected for resistance to KAN, thereby yielding the plasmid pJTmcaPnpKAN. A 2.8-kb amplicon, which corresponds to the O35E mcaP gene interrupted by the Kanr cartridge in the middle of the open reading frame (ORF), was generated from pJTmcaPnpKAN with the primers P1 and P2. This PCR product was then electroporated into the M. catarrhalis strains O35E and O35E.ZCS. The resulting Kanr colonies were screened by PCR with primers P1 and P2 to identify potential mcaP isogenic mutants (data not shown). Southern blot experiments were performed to confirm that proper allelic exchange had occurred in the isogenic mutants O35E.M and O35E.ZCSM (data not shown).
Nucleotide sequence analysis. Plasmid DNA and PCR products were sequenced with an ABI Prism 310 genetic analyzer for automated DNA sequencing (Perkin-Elmer Biosystems). The nucleotide sequence data were analyzed with the GeneTool Lite software (BioTools Incorporated) and the Gapped BLAST 2.0 BLASTX search tool through the National Center for Biotechnology Information service with the nonredundant protein database. The oligonucleotide primer KAN-2 FP1 (Epicentre), which binds to nucleotides (nt) 1127 to 1151 of the EZ::TN <KAN-2> transposon, was used to sequence the plasmid pELFOS190TN6.
Antibodies and detection of selected M. catarrhalis antigens. The UspA1-specific monoclonal antibody 24B5 (8) and the Hag-specific monoclonal antibody 5D2 (47) have been described elsewhere. Outer membrane vesicles were prepared as described previously (42, 46). Whole-cell lysates of M. catarrhalis strains and E. coli recombinant cells were prepared as previously reported (8, 46). These preparations were heated at 100°C for 15 min, separated by electrophoresis into sodium dodecyl sulfate (SDS)-7.5% (vol/vol) polyacrylamide gels, and either stained with Coomassie blue or transferred to polyvinylidene difluoride membranes (Millipore) for Western blot analysis as previously described (Holm and Lafontaine, unpublished).
Adherence assays. For M. catarrhalis strains, quantitative and visual adherence assays were performed as reported by Holm and Lafontaine (unpublished). For E. coli recombinant bacteria, quantitative adherence assays were conducted in 24-well TC plates (Cellstar) seeded with 2.5 x 105 human cells in 0.5 ml of TC medium. Each monolayer was inoculated with one E. coli colony, incubated at 37°C for 3 h, and centrifuged for 5 min at a speed of 165 x g to facilitate contact between bacteria and human cells. Following a second incubation and centrifugation, the nonadherent bacteria were obtained by removing the TC medium covering each monolayer and gently washing each well five times with 0.5 ml of phosphate-buffered saline (PBS) supplemented with 0.15% gelatin (PBSG; pH 7.0). For each monolayer, the TC medium was combined with the washes, serially diluted with PBSG, and spread onto agar plates in order to determine the number of nonadherent bacteria. Epithelial cells with bound bacteria were released from the plastic support of the TC plate with a polyvinylpyrrolidone-EGTA-trypsin solution containing 1% (vol/vol) polyvinylpyrrolidone (BioSource International), 0.02% (vol/vol) EGTA (BioSource International), 0.02% (vol/vol) trypsin, and 0.02% (vol/vol) EDTA (Cellgro). The contents of each well were suspended in 0.5 ml of PBSG, serially diluted, and plated onto agar plates in order to determine the number of bacteria bound per monolayer of human cells. In Table 2, the results of our adherence assays are expressed as the percentages (± standard errors) of recombinant E. coli bacteria that bound to monolayers. Adherence assays were performed in triplicate on at least three independent occasions. In Fig. 5 and Table 4, the percent adherence of the M. catarrhalis wild-type strain O35E was set at 100%, and the adherence of isogenic mutants is expressed as the percentage (± standard error) relative to that of O35E.
|
View this table: [in a new window] |
TABLE 2. Adherence to human cells and lipolytic activities of recombinant E. coli cells
|
![]() View larger version (31K): [in a new window] |
FIG. 5. Adherence of M. catarrhalis strains to human cell lines in vitro. The adherence of the M. catarrhalis mutants O35E.M, O35E.ZCS, and O35E.ZCSM is expressed as the percentage (± standard error) of that of the parent strain O35E. The asterisk indicates that the decrease in O35E.ZCSM adherence, compared to the adherence of O35E.ZCS, is statistically significant. Expression (+) or lack thereof (-) of selected proteins is indicated.
|
|
View this table: [in a new window] |
TABLE 4. Adherence of M. catarrhalis strains to human cells
|
Protein sequencing by liquid chromatography-tandem mass spectrometry (LC-MS/MS).
Proteins present in M. catarrhalis outer membrane vesicles were resolved by SDS-PAGE and subsequently stained with Coomassie brilliant blue. The band corresponding to McaP was excised and further destained with 30% methanol at room temperature for 3 h. This gel piece was washed with 150 µl of acetonitrile-0.1 M ammonium bicarbonate buffer (1:1, pH 8.0), diced into 1-mm cubes, and rehydrated in 30 µl of 0.1 M ammonium bicarbonate buffer containing 0.4 µg of sequencing-grade, modified trypsin (Promega). An additional 15 µl of digestion buffer without trypsin was added after 10 min. Digestion was carried out for 16 h at 37°C. It should be noted that another aliquot of trypsin (0.2 µg) was added after 12 h, and the sample was incubated for an additional 4 h. Peptides were extracted with 150 µl of 60% acetonitrile containing 0.1% trifluoroacetic acid at 30°C for 30 min and concentrated to a final volume of 15 µl under vacuum. A 2-µl aliquot of this digest was then separated on an Aquasil C18 reverse-phase column (75-mm inside diameter by 15-mm tip by 5 cm; New Objectives) by using an acetonitrile-1% acetic acid gradient system (5 to 75% acetonitrile over 30 min followed by 95% acetonitrile for 3 min) at a flow rate of 250 nl/min. Eluted peptides were directly introduced into an ion-trap mass spectrometer (LCQ Deca XP Plus; Finnigan) equipped with a nanospray source. The mass spectrometer was operated on a double play mode where the instrument was set to automatically acquire a full MS scan (400 to 2,000 m/z) and collision-induced dissociation (CID) spectra on the most abundant ion from the full MS scan (relative collision energy,
30%). Dynamic exclusion was set to acquire three CIDs on the most abundant ion and exclude it for 3 min. The CIDs were compared with the in silico fragmentation pattern of McaP protein generated using the MS-Digest provision of Protein Prospector http://prospector.ucsf.edu.
Lipolytic activity assay. Lipolytic assays were performed as previously described (64). Briefly, 10 mM stock solutions of the p-nitrophenyl esters (pNPs; Sigma) of butyrate (C4), caproate (C6), caprate (C10), laurate (C12), myristate (C14), and palmitate (C16) were prepared using 2-propanol (Fisher) as the solvent. These pNP stocks were subsequently diluted to a final substrate concentration of 1 mM in PBS (pH 8.0) supplemented with 2.3 mg of deoxycholic acid (Sigma)/ml and 1.1 mg of gum arabic (Acros)/ml. Plate-grown bacteria were suspended in either PBS (pH 8.0; recombinant E. coli cells) or PBSG (pH 8.0; M. catarrhalis cells) to a density of 100 Klett units (E. coli) or 25 Klett units (M. catarrhalis), and 950 µl of these suspensions was subsequently mixed with 50 µl of the indicated 1 mM pNP substrate. The absorbance of each sample was then measured at wavelengths of 410 and 580 nm with a spectrophotometer (Spectronic Instruments) in order to estimate lipolytic activity and bacterial cell density, respectively. These optical measurements were taken immediately after the addition of the pNP substrates as well as after 15 min of incubation at room temperature. Lipolytic assays were performed in triplicate on at least three separate occasions. The results presented in Fig. 3 are expressed as the mean (± standard deviation) of the [(OD410 at 15 min - OD410 at 0 min)/OD580 of the sample]/15 min, where OD410 is optical density at 410 nm.
![]() View larger version (25K): [in a new window] |
FIG. 3. Lipolytic activities of E. coli recombinant cells (A) and M. catarrhalis strains (B). Lipid substrates composed of 4 (C4)- to 16 (C16)-carbon chains are described in Materials and Methods. Units = [(OD410 at 15 min - OD410 at 0 min)/OD580]/15 min, where OD410 is the optical density at 410 nm.
|
1 ml. Phospholipase assays. The following enzymes were used to study the ability of McaP to cleave phospholipids: McaP-enriched extract obtained from E. coli cells harboring pJTmcaP (60 µl), extract prepared from E. coli cells containing the control plasmid pBR322 (60 µl), porcine pancreas PLA2 (100 U; Sigma), and Vibrio species PLB (1 U; Sigma). Egg-yolk type XIII-E phosphatidylcholine (PC; 1 mg; Sigma) or lysophosphatidylcholine (LPC; 150 µg; Sigma) was combined with the indicated enzyme in 500 µl of buffer solution (5.0 mM Tris, 1.0 mM CaCl2, 1 mM ZnCl2, pH 7.2) and incubated overnight at 37°C with shaking. After extraction with 3.0 ml of a chloroform-methanol solution (4:1), the chloroform layer was dried under vacuum. The products were resuspended in 20 µl of a chloroform-methanol solution (2:1) and spotted on a Silica Gel 60 plate (Whatman), along with 100 µg of PC, 200 µg of LPC, 150 µg of egg yolk glycerophosphorylcholine (GPC; Sigma), 100 µg of diacylglycerol (DAG; Sigma), or 100 µg of phosphatidic acid (Sigma). To increase the amounts of products resulting from the digestion of PC and improve our ability to visualize them after staining, we combined the extracted products of four individually digested samples containing 1 mg of PC each and resolved them in Fig. 4A. Using the solvent system of Matsuzawa and Hostetler (33), we developed the plate to a height of 7 cm from the origin in a chloroform-methanol-water solution (65:35:5), allowed the plate to dry, and developed to 20 cm from the origin in a solution containing heptane-diethylether-formic acid (90:60:4). Iodine staining was used for the visualization of phospholipids and their digestion products.
![]() View larger version (47K): [in a new window] |
FIG. 4. Thin-layer chromatography analysis of McaP phospholipase activity. (A) PC substrate. Lanes 1, unprocessed fatty acids (FA) and DAG. Lane 2, unprocessed PC. Lanes 3 and 4, digestion products of PC incubated with pBR322 or pJTmcaP extracts, respectively. Lanes 5 to 8, unprocessed LPC, GPC, DAG, and phosphatidic acid (PA), respectively. Lanes 5 to 8 also represent the digestion products of PLA, PLB, PLC, and PLD, respectively (as indicated by the brackets). (B) LPC substrate. Lane 1, unprocessed LPC. Lanes 2 and 3, digestion products of LPC incubated with pBR322 or pJTmcaP extracts, respectively. Lanes 4 and 5, products of LPC digestion with commercial PLA2 or PLB. Arrowheads indicate the locations of GPC bands (A) and LPC bands (B). Arrows denote the chloroform-methanol-water solvent front.
|
Nucleotide sequence accession number. The nucleotide sequence of the M. catarrhalis O35E mcaP gene has been deposited in GenBank under the accession number AY291294.
|
|
|---|
While binding was significantly reduced, we observed that the M. catarrhalis uspA1 and hag mutants still attached to Chang and A549 cells. We hypothesized that a molecule that has yet to be identified mediated this adherence. To test this, we constructed a plasmid library of M. catarrhalis DNA fragments, introduced this library into the nonadherent E. coli cloning strain EPI300, and selected for recombinant clones that had gained the ability to bind A549 and Chang cells. To avoid the possibility of isolating clones expressing the previously characterized adhesins UspA1, UspA2, and Hag, the chromosomal DNA used to construct our library was obtained from the uspA1-uspA2-hag mutant O35E.ZCS (47). A total of 6,505 E. coli recombinant clones carrying DNA inserts of 25 to 35 kb were generated. Twenty-five randomly chosen clones were digested with restriction endonucleases and were found to contain random inserts.
Recombinant clones were mixed with A549 or Chang cells and enriched for adherent clones. Using this approach, we independently isolated E. coli recombinant cells that expressed the same adherence factor. Figure 1B illustrates the binding of the representative recombinant clone pELFOS190 to Chang cells. Quantitative assays also revealed that this plasmid considerably increased the binding of E. coli recombinant cells to both Chang and A549 cells (Table 2).
![]() View larger version (53K): [in a new window] |
FIG. 1. Binding of E. coli recombinant cells to Chang monolayers in a visual adherence assay.
|
To determine the entire sequence of the disrupted gene, which we designated mcaP for M. catarrhalis adherence protein, we first sequenced out of the transposon with transposon-specific primers and then used "primer walking" to extend this sequence. The candidate mcaP ORF was found to be 1,950 nt in length and predicted to specify a protein of 650 amino acids (aa) with a molecular mass of 71,483 Da. Analysis through the SignalP V1.1 World Wide Web server (www.cbs.dtu.dk/services/SignalP) predicted McaP to contain a signal sequence with a potential cleavage site between aa 50 and 51 (e.g., ATA-Q, where the dash illustrates the cleavage site), based on the algorithm developed by Nielsen and colleagues (44). Interestingly, this putative signal sequence cleavage site resembles that of the M. catarrhalis adhesin UspA1 (ASA-Q [8]). Cleavage of McaP at this position would result in a mature protein with a molecular mass of 66,001 Da. Potential ORFs were also located 109 nt upstream and 149 nt downstream of mcaP, and these ORFs exhibited similarities to biotin synthase (75%) and a hypothetical membrane protein (82%), respectively.
When the predicted amino acid sequence of the McaP protein was analyzed with the Gapped BLAST 2.0 search tool through the National Center for Biotechnology service, the most similar prokaryotic protein was the Moraxella bovis PLB (44% identity and 60% similarity). McaP also appeared to be related to a family of lipolytic enzymes due to the presence of a highly conserved motif, Gly-Asp-Ser-Leu (GDSL) (62), located in the N-terminal region of each family member (residues 60 to 63 in McaP). This group of lipolytic enzymes includes M. bovis PLB (13) and the Pseudomonas aeruginosa surface-bound esterase EstA (64) (29% identical and 42% similar to McaP). Additionally, the C-terminal portion of McaP (aa 371 to 650) exhibited substantial similarity to members of the autotransporter family of proteins (20, 21), more specifically to the predicted integral membrane ß-barrel domain that is involved in the transport of these proteins across cell membranes.
Given this similarity to members of the GDSL family, we decided to test whether McaP exhibited lipolytic activity. This was accomplished by growing E. coli recombinant cells on medium supplemented with 1% (vol/vol) Tween 80. This water-soluble substrate yields an insoluble precipitate upon cleavage by a lipolytic enzyme, resulting in easily observed halos around lipolytically active bacteria. Recombinant E. coli cells harboring pELFOS190 had lipolytic activity when grown on Tween 80 agar plates, whereas cells harboring pELFOS190TN6, which contained a transposon in the mcaP ORF, did not (Table 2). Thus, expression of the mcaP gene appeared to confer lipolytic activity.
Cloning and expression of the M. catarrhalis O35E mcaP ORF in E. coli. The plasmid pELFOS190TN6 contained a large M. catarrhalis DNA fragment that could specify several gene products. To rule out polar effects and conclusively determine whether McaP functions as an adhesin as well as a lipolytic enzyme, a 2.1-kb amplicon containing the mcaP ORF was cloned and expressed in the nonadherent E. coli cloning strain TOP10. The resulting construct, which was designated pJTmcaP, expressed a distinct 62-kDa protein (Fig. 2A, lane 2) that conferred a 25- to 100-fold increase in adherence to human cells compared to that conferred by the negative vector control pBR322 (Table 2). These results clearly demonstrated that the mcaP gene product corresponded to our candidate adhesin. Furthermore, McaP expression by E. coli cells harboring pJTmcaP conferred lipolytic activity (Table 2). We next tested recombinant E. coli cells for lipolytic activity by using pNPs. In these tests, the lipolytic cleavage of pNPs releases nitrophenol, which can be measured spectrophotometrically. As shown in Fig. 3A, E. coli cells harboring pJTmcaP preferentially cleaved short-chain substrates. In general, esterases can cleave only short-chain substrates (4 to 10 carbons) whereas lipases have a preference for longer-chain substrates (12 to 18 carbons). Even when incubated overnight with long-chain pNPs, E. coli cells harboring pJTmcaP were unable to cleave these substrates. In contrast, Staphylococcus aureus cells, which exhibit lipase activity (50), readily digested these long-chain ester derivatives (data not shown). Thus, McaP may be classified as an esterase.
![]() View larger version (40K): [in a new window] |
FIG. 2. SDS-PAGE analysis of M. catarrhalis strains and E. coli recombinant cells. (A) Whole-cell lysates prepared from E. coli TOP10 recombinant cells harboring the plasmid pBR322 (lane 1) or pJTmcaP (lane 2), resolved by SDS-PAGE, and stained with Coomassie blue. (B) Ten microliters of heat extract prepared from E. coli cells harboring pBR322 (lane 1) or pJTmcaP (lane 2). (C) Proteins present in outer membrane vesicles that were prepared from strain O35E (lane 1) and its isogenic mcaP mutant O35E.M (lane 2). The arrowheads indicate the position at which the mcaP gene product migrates. Positions of molecular mass markers are shown to the left in kilodaltons.
|
Since the bacterial gene product most similar to McaP was the M. bovis PLB, we tested whether McaP functioned as a phospholipase. This was accomplished by using thin-layer chromatography to separate the products that result from digestion of PC with the aforementioned extracts. Lane 4 in Fig. 4A demonstrates that the McaP-enriched extract cleaved PC, while the control extract did not (lane 3 in Fig. 4A). Thus, McaP is a phospholipase.
Phospholipases can be further classified based on the substrate bond(s) that they cleave (53). Figure 4A shows some of the products generated by digestion of PC with different phospholipases. Briefly, digestion with PLA or PLB releases fatty acids (lane 1). Digestion with PLA also results in the production of LPC (lane 5), whereas cleavage by PLB yields GPC (lane 6). Digestion with PLC and PLD yields DAG (lane 7) and phosphatidic acid (lane 8), respectively. Lane 4 in Fig. 4A indicates that digestion of PC with the McaP-enriched extract yielded fatty acids but not DAG or phosphatidic acid. Thus, McaP did not exhibit PLC or PLD activity. The presence of GPC and free fatty acids in the McaP digestion sample, however, indicated that McaP was a PLB (arrowhead in lane 4 of Fig. 4A).
Due to the faintness of the indicated GPC band, we also analyzed the products of LPC digestion by McaP. It should be noted that PLB cleaves LPC whereas PLA does not hydrolyze this substrate. As shown by the arrowheads in Fig. 4B, LPC is present in the products of digestion with commercial PLA2 (lane 4) and the pBR322 control extract (lane 2). The substrate, however, is absent from the digestion products with commercial PLB (lane 5). Therefore, the absence of LPC in the McaP digestion products (lane 3) confirms that McaP cleaved this substrate and has PLB activity.
Construction and characterization of M. catarrhalis isogenic mcaP mutants. The experiments described above were performed in E. coli. To study the functional properties of McaP in its native host M. catarrhalis, we constructed an isogenic mcaP mutant (designated O35E.M). As shown in lane 2 of Fig. 2C, this mutant lacked expression of a 62-kDa OMP. Western blot analyses also showed that O35E.M expressed wild-type levels of UspA1, UspA2, and Hag (data not shown). To confirm that this 62-kDa OMP corresponded to the mcaP gene product, outer membrane vesicles prepared from M. catarrhalis O35E were resolved by SDS-PAGE. The protein indicated by the arrowhead in Fig. 2C was subjected to in-gel digestion with trypsin. The resulting peptide fragments were sequenced by LC-MS/MS and were found to correspond to peptides spanning the entire length of the deduced amino acid sequence of McaP (Table 3). These results demonstrate that the OMP indicated by the arrowhead in Fig. 2C was McaP.
|
View this table: [in a new window] |
TABLE 3. Amino acid sequences of peptides derived from the SDS-PAGE-purified McaP protein from M. catarrhalis O35E
|
Finally, we tested the ability of McaP to function as an esterase in M. catarrhalis by using the chromogenic pNP substrates. The data presented in Fig. 3B clearly show that lack of McaP expression abolished the esterase activity of M. catarrhalis O35E cells. The lack of McaP expression by O35E.ZCSM also abolished the esterase activity of O35E.ZCS cells (data not shown).
|
|
|---|
Although the enrichment of mcaP clones in nearly all cases does not exclude the existence of additional unidentified M. catarrhalis adhesin(s), our results suggest that clones expressing McaP preferentially bind to A549 and Chang cells in our assays. Interestingly, lack of McaP expression did not appear to decrease the binding of strain O35E.ZCSM to A549 cells (Fig. 5B), even though our data clearly showed that McaP contributes to M. catarrhalis adherence to Chang, 16HBE14o-, HEp-2, and NCIH292 cells (Fig. 5A and Table 4). These observations raise the possibility that M. catarrhalis expresses an adhesin other than UspA1, UspA2, Hag, or McaP, which would be involved in adherence to A549 cells. We are currently testing this hypothesis.
Our present lack of antibodies to McaP limits our ability to conclusively determine whether this protein contains surface-exposed epitopes or to evaluate its level of expression by M. catarrhalis cells. Nevertheless, McaP can be visualized upon Coomassie blue staining of OMPs resolved by SDS-PAGE (lane 2 in Fig. 2C). Furthermore, the esterase activity of whole M. catarrhalis cells conferred by McaP (Fig. 3B) suggests that at least a portion of this protein is surface exposed or exported. This esterase activity toward the substrate tributyrin has been extensively used as a diagnostic tool to differentiate M. catarrhalis from Neisseria sp. (56, 58). The identity of the responsible lipolytic protein, however, was previously unknown. Our data clearly demonstrate that McaP confers this phenotype. Sequence analysis also indicates that McaP may belong to the family of outer membrane autotransporter proteins. Taken together, these observations suggest that McaP is associated with the outer membrane of M. catarrhalis.
In addition to its ability to function as an esterase, McaP is a PLB that cleaves PC as well as LPC. While esterases and phospholipases are both categorized as lipolytic enzymes, their substrate specificities differ, as does the present understanding of their respective contribution to microbial pathogenesis. To the best of our knowledge, little is known about the role of esterases in pathogenesis or adherence. In contrast, the contribution of phospholipases to the development of infections has been delineated to a greater extent, particularly that of PLA and PLC (18, 53, 57). For example, phospholipases contribute to destruction of lung surfactant (16, 23), increased vascular permeability (39), colonization of host tissues (11, 65), stimulation of the inflammatory response (31), and generation of signal transducers (48). Interestingly, the PLB secreted by Candida albicans (PLB1) has been shown to increase invasion and virulence in a mouse model of infection (40). The ability of McaP to function as both a phospholipase and an adhesin led us to question whether it also plays a role in invasion of human cells. However, the expression of McaP by recombinant E. coli did not increase invasion, nor did the isogenic mcaP mutant strain O35E.M exhibit decreased invasion (data not shown). Thus, the adherence phenotype that we observed in our assays is not the result of invasion, which in turn indicates that McaP is indeed an adhesin.
It is tempting to speculate about the connection between the adherence and lipolytic properties of McaP. While one function may be dependent upon the other, it is possible that these two biologically important functions are separable. Our sequence analysis suggests that McaP is a member of the family of autotransporter proteins, classified by their ability to utilize a C-terminal
-barrel to secrete an internal passenger domain across the outer membrane. After reaching the extracellular milieu, the passenger domains are capable of performing one or more virulence-associated functions (20, 21). For example, the Haemophilus influenzae protein Hap functions as a serine protease as well as an adhesin. Although separate domains of the protein confer these activities, they interact in such a way that loss of proteolytic cleavage results in increased adherence to human epithelial cells (22). With this in mind, we are currently investigating the classification of McaP as an autotransporter protein as well as the relationship between its various functions.
This report constitutes the first description of the novel M. catarrhalis adhesin McaP, which also functions as an esterase and a PLB. No other M. catarrhalis lipolytic enzyme has been reported to date, and few microbial PLBs have been characterized, particularly in terms of their contribution to pathogenesis. Considering the frequent classification of adherence and lipolytic activity as virulence factors, further studies of the role of McaP in pathogenesis as well as its vaccinogenic potential are warranted.
We thank Eric Hansen at the University of Texas Southwestern Medical Center in Dallas for providing M. catarrhalis strains and antibodies. We also thank Dieter Gruenert and the University of California for providing the human bronchial cell line 16HBE14o-. We also thank Herman Schut, Jieh-Juen Yu, and Chiung Yu-Hung for providing valuable information and materials for the thin-layer chromatography assays. We also thank Eric Hansen, Robert Blumenthal, Herman Schut, Darren Sledjeski, and Mark Wooten for their helpful comments on the manuscript.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»