Previous Article | Next Article ![]()
Infection and Immunity, August 2003, p. 4657-4663, Vol. 71, No. 8
0019-9567/03/$08.00+0 DOI: 10.1128/IAI.71.8.4657-4663.2003
Copyright © 2003, American Society for Microbiology. All Rights Reserved.
Groupe de Recherche sur les Maladies Infectieuses du Porc, Département de Pathologie et Microbiologie, Faculté de Médecine Vétérinaire, Université de Montréal, St. Hyacinthe, Québec, Canada J2S 7C6,1 Animal Disease Research and Diagnostic Laboratory, College of Agriculture and Biological Sciences, Veterinary Sciences Department, South Dakota State University, Brooklings, South Dakota 57007-13962
Received 13 December 2002/ Returned for modification 27 February 2003/ Accepted 14 May 2003
|
|
|---|
|
|
|---|
While the pathogenesis of porcine pleuropneumonia has been studied by many groups, the disease is still not completely understood. Several virulence factors have already been identified, such as capsule, LPS, outer membrane proteins (OMPs), and RTX (repeat in toxin) toxins (7, 13, 17, 40). Some of the factors that could potentially be involved in A. pleuropneumoniae colonization of the respiratory tract have also been reported. Overbeke et al. recently reported that the expression of a 55-kDa OMP and fimbriae play a role in the adherence of strains from serotypes 5a, 9, and 10 to alveolar epithelial cells in culture (31).
Our group has previously shown that the LPS molecule plays an important role in adherence of the bacterium to porcine respiratory tract cells and mucus (4, 5, 20, 21, 32). LPS molecules are major components of the outer membranes of gram-negative bacteria. They consist of a polysaccharide and a lipid moiety. The polysaccharide part is composed of a core region, which is an oligosaccharide that contains 3-deoxy-D-manno-octulosonic acid (Kdo), and the O antigen, a polysaccharide chain that consists of repeated units (18). The polysaccharide portion of LPS, but not the lipid A portion, is responsible for binding of A. pleuropneumoniae to porcine respiratory tract cells and mucus (15, 32, 35).
Putative receptors for A. pleuropneumoniae LPS have been described. Proteins of approximately 38.5 kDa that are present in swine tracheal epithelial cells showed affinity for LPS of A. pleuropneumoniae (33). A. pleuropneumoniae cells and LPS are also able to recognize saccharide sequences found in different glycosphingolipids such as GalNacß1-4Gal found in GgO3 and GgO4 molecules (2).
Another class of membrane lipids, the phospholipidsparticularly phosphatidylethanolamine (PE)has been described as a putative receptor for pathogenic bacteria including Chlamydia pneumoniae and Chlamydia trachomatis (24), Helicobacter pylori (27), Helicobacter mustelae (16), Haemophilus influenzae (8), Campylobacter upsaliensis (8), and enteropathogenic and enterohemorrhagic Escherichia coli (12).
The aims of the present study were to determine whether A. pleuropneumoniae binds to commercial phospholipids or lipids extracted from swine lungs and to study whether LPS molecules are implicated in this process.
|
|
|---|
Bacterial strains and growth conditions. All the strains used for TLC plate assays in this study are described in Table 1. A. pleuropneumoniae reference strains representing serotypes 1 (4074), 5b (L20), and 7 (WF83) were grown on brain heart infusion (BHI; Difco Laboratories, Detroit, Mich.) agar plates supplemented with 15 µg of ß-NAD per ml. The nalidixic acid-resistant mutant (4074 Nalr) derived from the A. pleuropneumoniae serotype 1 reference strain was grown on BHI-NAD medium supplemented with 30 µg of nalidixic acid (Nal) per ml. LPS mutants generated by mini-Tn10 mutagenesis were grown on BHI-NAD-Nal plates supplemented with 75 µg of kanamycin per ml (15, 35). For microtiter plate binding assay (MPBA), A. pleuropneumoniae strain 4074 was grown overnight in BHI broth supplemented with 5 µg of NAD per ml.
|
View this table: [in a new window] |
TABLE 1. Binding of A. pleuropneumoniae reference strains and various LPS mutants to PE using TLC binding assay
|
TLC binding assay. Binding of A. pleuropneumoniae to lipids was assayed as described previously with few modifications (8). TLC plates were prepared by using 10 µg of extracted lipids or commercial phospholipids. The lipids were applied on a TLC plate and separated by using chloroform-methanol-water (60:35:8 by volume) in a TLC chamber. The plate was then dried and blocked for 2 h by incubation with 3% gelatin in PBS with agitation at 37°C. After three 15-min washes with PBS with agitation at 37°C, the plates were overlaid with a bacterial suspension resuspended in PBS at an A540 of 1.8 (equivalent to approximately 3 x 109 CFU/ml) and incubated for 2 h. After three washes in PBS to remove unbound bacteria, the TLC plates were incubated for another 2 h with rabbit polyclonal antibodies raised against whole cells of A. pleuropneumoniae serotype 1, 5b, or 7, kindly supplied by K. R. Mittal (Université de Montréal). The plates were then washed twice and incubated for 1 h with a 1:1,000 goat anti-rabbit immunoglobulin G (heavy plus light chain)-horseradish peroxidase conjugate from Jackson ImmunoResearch Laboratories (Mississauga, Ontario, Canada). After two washes, binding to lipid was revealed by the addition of 4-chloro-1-naphthol and hydrogen peroxide. As controls, TLC plates that had not been overlaid with bacterial cells were incubated with primary and secondary antibodies; these antibodies did not bind directly to the lipids. All the overlay assays were performed at least five times.
MPBA. To confirm binding of A. pleuropneumoniae to PE, MPBAs were performed according to the methods of Beausoleil and Dubreuil (3) with few modifications. Duplicates of 50 µl of PE (from egg yolk) and phosphatidylserine (PS [from soybean as negative control]; 0.2 µg/µl) diluted in methanol were coated by evaporation for few hours in polystyrene microtiter enzyme-linked immunosorbent assay plates (Falcon 3070 flat-bottom microtest III plate; Becton Dickinson Labware, Lincoln Park, N.J.). Two hundred microliters of PBS-casein (1%, wt/vol) was added in each well for an overnight blocking at 4°C. Wells were then washed once with 200 µl of PBS, and 50 µl of bacterial suspension resuspended in PBS (A540, 0.140) was then added to the wells for 1 h at 37°C. Plates were washed five times with PBS. Then, 50 µl of rabbit polyclonal antibodies raised against whole cells of A. pleuropneumoniae in PBS-casein (1%, wt/vol) was added and left for 1 h at 37°C. Plates were again washed five times as described above, and 50 µl of goat anti-rabbit immunoglobulin in PBS-casein (1%, wt/vol) coupled to horseradish peroxidase was added to each well and incubated at 37°C for 1 h. Plates were washed three times, and 50 µl of the chromogenic substrate ABTS {2,2'-azino-di-[3-ethylbenzthiazoline sulfonate (6)]; 0.4 mM} dissolved in citrate buffer (pH 4) containing 0.5 mM H2O2 was added. The optical density (OD) was measured with an enzyme-linked immunosorbent assay recorder (MR5000; Dynatech) at 410 nm. Three wells on each plate received methanol without any phospholipid and served as blanks. For analysis, the mean OD obtained for these wells was subtracted from the OD obtained for each of the phospholipids.
Inhibition with MAbs. The inhibition of binding with monoclonal antibodies (MAbs) was done as described previously (1) by using MAb against A. pleuropneumoniae serotype 1 O antigen (5.1 G8F10) and against the O antigen of serotype 2 (101-G02), kindly supplied by M. Gottschalk (Université de Montréal).
Identification of extracted lipids. The total lipids extracted from swine lungs were stained either with molybdenum blue, which is specific for phospholipids, or sprayed with ninhydrin, which detects free amino groups contained in PE and PS (14). The lipid of interest was then extracted from the silica gel after migration with the neutral migration solvent as described previously by Rousset et al. (36) with few modifications. Briefly, 50 µg of lower-phase lipid extract was applied in a linear configuration across a 5-cm-wide band on a TLC plate. Commercial PE (egg yolk) was applied at one end of the TLC plate and the chromatography was done as described above. Following the migration, the standard lane was cut out and stained with molybdenum blue. The region that corresponded to the band of PE on the remaining unstained plate was scraped with a scalpel, and the silica gel was collected in a glass tube. We also performed a blank control experiment with silica gel to which no lipid material was applied. Two milliliters of a 2:1 (vol/vol) chloroform-methanol mixture was mixed with the collected silica gel. After 10 min of incubation at room temperature, the mixture was centrifuged at 20,000 x g for 5 min. The supernatant obtained was then transferred to another glass tube. The solvent was then evaporated in a fume hood under a stream of nitrogen. Two milliliters of a solution of chloroform-methanol-water (8:4:3) was then added to the dried lipids, a step which was then followed by a 5-min centrifugation at 22,000 x g. The lower phase obtained was then collected from the glass tube without disturbing the silica pellet if one was present. The extract was put in a preweighed glass tube and then evaporated under a stream of nitrogen. The quantity of lipid was estimated on the basis of dry weight. Lipids were then resuspended in a chloroform-methanol (2:1) solution. Acid migration solvent composed of chloroform-methanol-acetic acid-water (25:15:4:2) and basic migration solvent composed of chloroform-methanol-30% ammonia (65:30:5) were used to compare the migration of extracted lipid of interest to commercial PE. For the mass spectrometry analysis, the extraction of the lipid from silica gel was performed as described above with some modifications. In the first place, ethyl acetate was used instead of chloroform; secondly, the sample analyzed was the supernatant of the first centrifugation. The analysis was done at the biomedical mass spectrometry unit of McGill University.
Mass spectrometry. The analysis was performed with a Quattro II (Micromass, Manchester, United Kingdom) triple quadrupole mass spectrometer by using electrospray in positive mode. The sample was introduced by direct infusion at a flow rate of 3 µl/min. Capillary voltage was set at 3.4 kV, cone voltage was set at 50 V, source temperature was kept at 80°C, and the collision cell energy was 31 eV with argon pressure at 1.7 x 10-3 mbar. The mass spectrometer was programmed to scan for a neutral loss of 141 m/z, which is characteristic for PE ions (10).
|
|
|---|
![]() View larger version (54K): [in a new window] |
FIG. 1. TLC plates stained with anisaldehyde (A) and immunostained chromatogram obtained by overlay with A. pleuropneumoniae serotype 1 cells (B). Lane 1, PE (egg yolk); lane 2, PS (soybean); lane 3, phosphatidylinositol (soybean); lane 4, phosphatidylcholine (bovine brain); lane 5, phosphatidylglycerol (egg yolk); lane 6, phosphatidic acid (egg yolk); lane 7, GgO4 (upper band, positive control), GD1a (lower band, negative control). Ten micrograms was used for each lipid.
|
![]() View larger version (23K): [in a new window] |
FIG. 2. TLC stained with anisaldehyde (A) and immunostained chromatogram obtained by overlay with A. pleuropneumoniae serotype 1 cells (B). Lanes contain different concentrations of PE as follows: lane 1, 10 µg; lane 2, 5 µg; lane 3, 2.5 µg; lane 4, 1.25 µg; lane 5, 0.63 µg; lane 6, 0.31 µg; lane 7, 0.16 µg; lane 8, 0.08 µg.
|
![]() View larger version (90K): [in a new window] |
FIG. 3. TLC stained with anisaldehyde (A) and immunostained chromatogram obtained by overlay with A. pleuropneumoniae serotype 1 cells (B). Lanes contain different concentrations of GlcCer (I), LacCer (II), GgO3 (III), or GgO4 (IV) as follows: lane 1, 10 µg; lane 2, 5 µg; lane 3, 2.5 µg; lane 4, 1.25 µg; lane 5, 0.63 µg; lane 6, 0.31 µg; lane 7, 0.16 µg; lane 8, 0.08 µg; lane 9, 0.04 µg; lane 10, 0.02 µg; lane 11, 0.01 µg.
|
![]() View larger version (87K): [in a new window] |
FIG. 4. TLC plate stained with anisaldehyde (A) and immunostained chromatogram obtained by overlay with A. pleuropneumoniae serotype 1 wild-type cells (B), CG1 (LPS core oligosaccharide mutant) (C), and 27.1 (LPS O antigen mutant) (D). Ten micrograms of PE was applied to each lane.
|
Binding of A. pleuropneumoniae serotype 1 to a lipid extracted from swine lungs. A. pleuropneumoniae serotype 1 was able to bind to a lipid present in the lower phase of a Folch extraction performed on swine lungs (Fig. 5). This phase normally contains all tissue lipids other than gangliosides. The lipid comigrated with commercial PE in a neutral solvent system (Fig. 5A and B) as well as in acidic and basic solvent systems (Fig. 6). The unknown lipid, like the commercial PE, stained with ninhydrin, which is specific for free amino groups (Fig. 5A), and with molybdenum blue, which stains phospholipids (Fig. 5B). We did not observe any binding in the upper phase, which contains the nonlipid moieties as well as most of the gangliosides and only negligible amounts of the other lipids.
![]() View larger version (108K): [in a new window] |
FIG. 5. TLC plates stained with ninhydrin (A), molybdenum blue (B), and immunostained chromatogram obtained by overlay with A. pleuropneumoniae serotype 1 cells (C) Lane 1, lower phase from a Folch extraction performed on porcine lungs; lane 2, commercial PE.
|
![]() View larger version (122K): [in a new window] |
FIG. 6. TLC plates stained with molybdenum blue showing migration of PE with a basic solvent containing chloroform-methanol-30% ammoniac (65:30:5) (A) or an acidic solvent containing chloroform-methanol-acetic acid-water (25:15:4) (B). Lane 1, lipids extracted from swine lung; lane 2, commercial PE.
|
![]() View larger version (39K): [in a new window] |
FIG. 7. Electrospray mass spectrometry analysis in positive mode of commercial PE from egg yolk (A and B) and phospholipids from lungs of swine (C and D). The mass spectrometer was programmed to scan for a neutral loss of 141 m/z (characteristic for PE ions). Scan of the ions present in the sample before collision-induced dissociation (panels A and C) and parent ions present after a neutral loss of 141 m/z collision-induced dissociation experiment (panels B and D).
|
|
|
|---|
Our results indicate that A. pleuropneumoniae can bind to PE but not to the five other phospholipids tested. This adds A. pleuropneumoniae to the growing list of pathogens that have affinity for PE but not for other phospholipids. The list includes other respiratory tract pathogens such as C. pneumoniae as well as H. influenzae, which is another member of the Pasteurellaceae family (8, 24). The importance of the polar ethanolamine head of the PE molecule in binding to these bacteria is suggested by the fact that a closely related phospholipid such as PS does not show any affinity to A. pleuropneumoniae or any of the other aforementioned pathogens. Reference strains representing the other prevalent A. pleuropneumoniae serotypes in North America (serotypes 5b and 7) also demonstrated binding to PE, which shows that binding of A. pleuropneumoniae to PE is not restricted to one serotype.
A. pleuropneumoniae serotype 1 cells were able to bind to a phospholipid in a swine lung extract identified as PE. This lipid was first stained by molybdenum blue, which stains lipids containing phosphate groups. It was also stained with ninhydrin, which is specific for the free amino group. Ninhydrin can therefore stain only two types of phospholipidsPE and PS. With the neutral solvent used, we could see that this phospholipid comigrated with commercial PE, which migrates differently from PS. We then compared the migration of the potential PE and of the commercial PE in both acidic and basic solvent systems and observed that these two phospholipids migrate similarly in these two solvent systems. Although its staining and migration were similar to those of PE, we additionally confirmed the identity of this phospholipid by using mass spectrometry analysis. We were first able to observe that commercial PE standard as well as PE extracted from a pig lung were composed of different species of PE that differ from each other at the level of their fatty acid chains. Interestingly, the PE species found in the two samples were very similar and both allow the binding of A. pleuropneumoniae serotype 1.
A. pleuropneumoniae serotype 1 also showed binding to lyso-PE (from egg yolk), which is a normal degradation product of PE. A similar binding was also observed with other pathogens such as C. upsaliensis, H. mustelae, and H. pylori (16, 39). These data show that the fatty acid attached to the second carbon of the glycerol backbone of PE is probably not essential for the recognition of PE by these bacteria. However, the second fatty acid chain seems to be critical for the optimal presentation of the phospholipid to the bacterial adhesin since, among all the commercial sources of PE tested (i.e., sheep brain, bovine brain, egg yolk, soybean, and E. coli), there was no binding to PE from sheep and bovine brain and very faint binding to PE from E. coli and soybean (data not shown). The strongest binding was to PE extracted from egg yolk, which is likely the result of variations in the fatty acids (27, 38). This phenomenon was also observed with other pathogens like C. upsaliensis and E. coli and can be explained by the fact that the length and degree of saturation of fatty acids may vary between the different sources of the phospholipids. All PEs are therefore not equally bound by bacterial pathogens (38).
To see whether LPS molecules were involved in the binding to PE, we first used isogenic O antigen and core LPS mutants of A. pleuropneumoniae serotype 1 generated by mini-Tn10 transposon mutagenesis (15, 25, 35). The data obtained showed that three core mutants as well as the wild-type parent strain were able to bind to PE. On the other hand, the O antigen rough mutants tested in binding assays (27.1, 44.1, and 51.1) were unable to bind PE.
To confirm that O antigens were implicated in the binding of A. pleuropneumoniae serotype 1 to PE, we then preincubated the bacteria with MAbs against LPS O antigen as described previously (1). These results provided another indirect proof that O antigen might be implicated in binding to PE. The same kind of inhibition was also previously observed with other putative lipidic receptors (mono- and disaccharide glycosphingolipids) like GlcCer, GalCer, LacCer, and sulfatidebut not with longer glycolipids like GgO3 and GgO4 (1). The O antigen of A. pleuropneumoniae serotype 1, which is the terminal part of the LPS, seems to be implicated in binding of short lipids such as PE, while the core region might be responsible for the binding to GgO3 and GgO4 (1). Interestingly, the binding data shown in Fig. 2 and 3 indicate that A. pleuropneumoniae serotype 1 demonstrates poorer recognition of short lipids like LacCer, GlcCer, and PE than longer lipids like GgO3 and GgO4. This phenomenon seems to be the same for A. pleuropneumoniae serotype 2 (1). The O antigen seems to have weaker affinity with its lipidic receptors compared to the core region with longer lipids. Since rough mutants of serotypes 2, 5b, and 7 are not yet available, further studies are needed in order to determine whether the O antigens of these serotypes are also involved in binding.
Interestingly, like several other bacterial pathogens (e.g., H. pylori, C. pneumoniae, C. trachomatis, H. influenzae, and Pseudomonas aeruginosa), A. pleuropneumoniae shows a common binding specificity for GgO3, GgO4 (1), and PE (the present study). To the best of our knowledge, A. pleuropneumoniae is the only known bacterium for which LPS is implicated in the binding to these three lipids.
In conclusion, A. pleuropneumoniae is able to bind to PE both from commercial sources and extracted from lungs of swine. The use of isogenic rough LPS mutants as well as monoclonal antibodies against O antigen indicate that the O antigen of A. pleuropneumoniae serotype 1 could be implicated in this interaction. It is tempting to speculate that, through a multiple-step binding process, A. pleuropneumoniae first uses low-affinity binding between O antigen and phospholipids (PE) or short glycolipids (LacCer and GlcCer) and then relies on the core oligosaccharide of LPS and/or surface proteins (55-kDa OMP, fimbriae) to interact more avidly with other larger lipidic (GgO3 and GgO4) or proteinic receptors.
We are grateful to M. Gottschalk and K. R. Mittal for monoclonal and polyclonal antibodies. We also thank O. A. Mamer, Director of the McGill University biomedical mass spectrometry unit, for the mass spectrometry analysis and Josée Labrie and Vincent Labrie for technical assistance.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»