Previous Article | Next Article ![]()
Infection and Immunity, September 2004, p. 5493-5497, Vol. 72, No. 9
0019-9567/04/$08.00+0 DOI: 10.1128/IAI.72.9.5493-5497.2004
Copyright © 2004, American Society for Microbiology. All Rights Reserved.
William A. Samsonoff, and Ronald J. Limberger*
David Axelrod Institute for Public Health, Wadsworth Center, New York State, Department of Health, Albany, New York
Received 2 April 2004/ Returned for modification 4 May 2004/ Accepted 9 June 2004
|
|
|---|
|
|
|---|
Research on T. denticola has been hampered by a paucity of genetic tools and efficient selectable markers. An erythromycin resistance cassette has been used to generate a number of insertional mutants of T. denticola (15). More recently, a coumermycin-based shuttle plasmid was developed for complementation analysis (4). However, coumermycin-based selection suffers from a high background level of spontaneously resistant cells. Thus, there is a need to develop additional selectable markers for use in creating T. denticola shuttle plasmids that can be used for expression and complementation studies. Development of an efficient expression plasmid would enable the use of T. denticola as a surrogate system (3) to study homologous genes from Treponema pallidum, a pathogenic spirochete that is not cultivable in cell-free medium.
A motility-related operon in T. denticola is transcribed from a sigma 28-like promoter and encodes seven polypeptides that are homologous with components of the Salmonella flagellar basal body (FlgB, FlgC, FliE, FliF, and FliG), as well as three putative flagellar export proteins (FliH, FliI, and FliJ) (5, 6, 22-24). T. denticola FliG has a 31% amino acid sequence identity with Salmonella enterica serovar Typhimurium FliG, which is part of the flagellar switch complex (10, 22, 23, 32). In S. enterica serovar Typhimurium, FliG is involved in torque generation, directional rotation of the flagellar filament (8, 19, 20), and flagellar filament structure (8, 11). The role of fliG in T. denticola is unknown. Because the organization and regulation of spirochete motility genes are different from those of enteric bacteria, analysis of T. denticola fliG will enable us to gain a better understanding of the role of this protein in spirochete motility.
Strains and media. T. denticola ATCC 33520 was grown at 36°C in New Oral Spirochete (NOS) broth with 10% rabbit serum or was plated on NOS medium containing 0.5% agarose (9, 18).
Construction and analysis of a fliG deletion mutant.
A suicide plasmid, pFEH1, was constructed (Fig. 1A) and was electroporated into T. denticola, using 5 to 10 µg of DNA as previously described (18). Plating was done on NOS-0.5% agarose plates containing 100-µg/ml erythromycin to select for double-crossover recombinants (18). After 1 week of incubation, small dense colonies grew on the surface of NOS-agarose plates. After growth in liquid medium, cells of this fliG deletion mutant, TDW
FLIG, showed no movement when observed by dark-field microscopy.
![]() View larger version (29K): [in a new window] |
FIG. 1. Plasmid constructions. (A) A suicide plasmid vector for generating a fliG deletion in T. denticola by allelic exchange. (B) A new expression plasmid, pBFC, that replicates and confers chloramphenicol resistance in T. denticola. This shuttle vector was used for cloning of T. denticola fliG as indicated for complementation analysis. NS, NsiI; P, PstI; M, MluI; K, KpnI; Sp, SpeI; S, SacI; N, NotI; A, ApaI; E, EcoRI; oriT.d., T. denticola origin of replication.
|
FLIG cells did not possess any flagella, and 94% of cells for which both ends could be observed lacked a flagellar filament on at least one end. The flagellar filaments of TDW
FLIG were usually shorter in length than those of the wild type. Cell ends lacking flagellar filaments also lacked hook and basal body structures. The phenotypic analysis of TDW
FLIG is summarized in Table 1. |
View this table: [in a new window] |
TABLE 1. Motility-related characteristics of wild-type T. denticola, TDW FLIG, and TDW FLIG harboring fliG on a newly constructed plasmid
|
FLIG by RT-PCR.
RNA was isolated from logarithmic-phase T. denticola cells with the Masterpure Complete DNA and RNA purification kit (Epicentre Technologies, Madison, Wis.), with an additional DNase step employing a manganese buffer to eliminate residual DNA (31). Primers specific for flgB, flgC, fliH, and fliI (Table 2) were designed with the Primer Express software (Applied Biosystems, Foster City, Calif.). For reverse transcription-PCR (RT-PCR), 90 ng of RNA was used in an RT-PCR according to the manufacturer's instructions (Applied Biosystems). T. denticola 16S rRNA was used as a reference target for quantitation (see Table 2 for primer sequences).
|
View this table: [in a new window] |
TABLE 2. Oligonucleotide sequences used in this study for RT-PCR
|
![]() View larger version (15K): [in a new window] |
FIG. 2. Quantitative RT-PCR analysis of gene expression of wild-type T. denticola and TDW FLIG. The y-axis scale indicates the relative quantity of RNA, as compared to a 16S rRNA standard. The x axis indicates the genes comprising the noncontiguous operons, with the direction of transcription as indicated by the horizontal arrows. Light gray bars are the T. denticola wild type, dark gray bars are TDW FLIG, and the striped bar indicates the expression of fliG from TDW FLIG harboring the plasmid pBFCFliG. The open triangle represents where the erythromycin resistance cassette is inserted in TDW FLIG and indicates that no fliG RNA was detected. The error bars for each gene represent 1 standard deviation derived from at least two independent assays.
|
FLIG, although at a markedly reduced level, compared to the wild type (Fig. 3). A similar reduction was noted in levels of the FlaA polypeptide (not shown).
![]() View larger version (48K): [in a new window] |
FIG. 3. Immunoblot with FlaB antiserum. The three FlaB polypeptides migrated as a single band under these gel running conditions. Lanes: 1, T. denticola wild type; 2, TDW FLIG; 3, TDW FLIG containing pBFCFliG. Note that the expression of flagellar filament polypeptides in TDW FLIG was only 17% that of the wild type.
|
FLIG were comparable to each other and to those in the wild type (Fig. 2). The regulatory mechanisms involved in the generation of a filament-deficient phenotype despite adequate levels of flaB RNA are unknown. Previously, we and others have qualitatively demonstrated a similar phenotype in other spirochete motility mutants (1, 18, 27). It is unclear whether the FlaB polypeptide is synthesized but rapidly degraded or whether it is not made at all, due to posttranscriptional regulation. In Borrelia burgdorferi, a decrease of FlaA in a FlaB mutant was shown to be a posttranscriptional effect (25). Construction of a newly derived expression plasmid that confers chloramphenicol resistance in T. denticola. The T. denticola replicative shuttle plasmid pKMR4PEMCS (3) was used as the basis for construction of a newly derived selectable plasmid (Fig. 1B). The new plasmid, pBFC, contained the T. denticola fla operon promoter (Pfla), located upstream of FliK/TapI (18), followed by the Staphylococcus aureus chloramphenicol resistance gene. The plasmid was electroporated into wild-type T. denticola and was selected on 10-µg/ml chloramphenicol.
The MIC of chloramphenicol for wild-type T. denticola is <1.0 µg/ml. T. denticola cells harboring pBFC grew well in 1.0 µg of chloramphenicol per ml, although they could grow in higher concentrations of this drug (up to 10 µg/ml). However, the growth rate slowed, and viability was reduced at the higher concentrations of chloramphenicol. For selection of transformants, 10 µg/ml was used in plated media to suppress background growth. The pBFC expression plasmid could be transformed and maintained in Escherichia coli, using kanamycin as a selectable marker, but it did not confer chloramphenicol resistance in E. coli.
The expression plasmid pBFC provides an important new tool for analysis of gene expression in T. denticola mutants. Use of chloramphenicol with this newly derived plasmid provides a method by which to obtain successfully transformed T. denticola cells with minimal or no background growth. It is likely, although not yet demonstrated, that this cat cassette will also be useful for generating chromosome-based gene interruptions.
Complementation analysis using fliG from T. denticola and T. pallidum. T. denticola fliG was cloned into pBFC to form pBFCFliG (Fig. 1B). Quantitative RT-PCR demonstrated that the amount of fliG RNA expressed from this plasmid was greater than the amount of wild-type fliG RNA expressed from the chromosomal location (Fig. 2). The higher expression levels of fliG RNA are likely the result of the plasmid-borne location of the promoter (L. Slivienski-Gebhardt and R. Limberger, unpublished observations), but they do not adversely affect cell growth or morphology.
Flagellated cells of TDW
FLIG harboring the plasmid pBFCFliG regained the ability to gyrate their cell ends in broth cultures, and the mean flagellar filament lengths were restored to the wild-type level. Cells also regained the ability to form spreading colonies on agarose plates, although colony diameters were less than wild type. The number of flagellar filament structures and the amount of FlaB polypeptides were slightly increased, although not to wild-type levels (Fig. 3 and Table 1). Conceivably, the synthesis and assembly of flagellar structures require expression of fliG at the lower wild-type levels, so as to ensure proper molecular stoichiometry. In B. burgdorferi, complementation of an flaB null mutant was achieved only after integration of flaB into the chromosome (28). Unfortunately, it is not yet technically feasible to insert fliG back into the T. denticola chromosome in order to attempt complementation from a chromosomal location.
T. pallidum fliG, cloned and expressed in pBFC, was also able to restore gyration of the cell ends of TDW
FLIG, as well as colony spreading in agarose. This is the first report of a successful complementation of a T. denticola mutant by using a T. pallidum gene. T. pallidum FliG shows an 84% amino acid sequence identity with T. denticola and a 90% similarity. These experiments demonstrate the potential utility of T. denticola as a surrogate system in which to analyze the function of T. pallidum polypeptides.
Future development and application of additional genetic tools will be critical in resolving the mechanisms involved in the expression, regulation, and function of spirochete motility genes.
Nucleotide sequence accession number. The entire sequence of fliG and partial sequences of fliF and fliH from T. denticola 33520 have been deposited in GenBank under accession no. AF343975.
This work was supported by Public Health Research Service grant AI34354 from the National Institutes of Health.
Present address: The Forsyth Institute, Boston, MA 02115. ![]()
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»