Previous Article | Next Article ![]()
Infection and Immunity, November 2005, p. 7126-7132, Vol. 73, No. 11
0019-9567/05/$08.00+0 doi:10.1128/IAI.73.11.7126-7132.2005
Copyright © 2005, American Society for Microbiology. All Rights Reserved.
Department of Microbiology and Immunology,1 Center for the Study of Biological Complexity, Medical College of Virginia at Virginia Commonwealth University, Richmond, Virginia 23298-0678,2 Department of Epidemiology, Infectious Diseases Program, University of North Carolina at Chapel Hill, Chapel Hill, North Carolina,3 Department of Microbiology and Infectious Diseases, Flinders Medical Centre, Bedford Park, South Australia, Australia4
Received 16 June 2005/ Returned for modification 29 July 2005/ Accepted 5 August 2005
|
|
|---|
|
|
|---|
An expanding number of human pathogens, including several spirochete species belonging to the Lyme disease and relapsing fever Borrelia groups, have been shown to bind the complement regulatory protein factor H and/or factor H-like protein 1 (FHL-1) (7, 9, 11, 13, 16, 17, 25, 27-29, 33, 35, 36). In addition, recombinant Omp100 of H. actinomycetecomitans has also been demonstrated to bind either factor H or FHL-1 and to play a role in adherence and invasion of KB cells (4). Factor H and FHL-1 are comprised of a series of short consensus repeats (SCRs) consisting of approximately 50 to 60 residues (reviewed in reference 47). FHL-1 is derived from the factor H mRNA via alternative splicing and consists of the first seven SCRs of factor H plus four additional hydrophobic residues at its C terminus (12, 46). Factor H and FHL-1 regulate the alternative complement pathway by serving as a cofactors for factor I-mediated cleavage of C3b (38, 39). In addition, they inhibit the initial formation and accelerate the dissociation of the alternative pathway C3 convertase by competing with Bb for binding to C3b. In terms of bacterial pathogenesis, surface-bound factor H and FHL-1 are thought to locally increase the efficiency of C3b cleavage and thereby inhibit opsonization and phagocytosis. In addition, some pathogens may bind to extracellular matrix or cell-anchored FHL-1 as a means to facilitate adherence and intracellular localization (33).
In this report, we demonstrate that T. denticola specifically binds the complement regulatory protein FHL-1. To our knowledge, this is the first bacterial protein identified that binds specifically FHL-1 and not factor H. The FHL-1 binding protein was determined to be surface exposed and to have a molecular mass of 14 kDa. We tentatively designated this protein FhbB (FHL-1 binding protein B). Using recombinant factor H SCR constructs, we showed that the binding of FhbB to FHL-1 is inhibited by heparin and is mediated via specific charged residues in SCR 7. These analyses provide the first direct evidence for the binding of a complement regulatory protein to T. denticola and enhance our understanding of the pathogenic mechanisms of this organism. FHL-1 binding by T. denticola may represent a potential adherence mechanism and may play an important role in biofilm formation and development of periodontal disease.
|
|
|---|
Factor H and/or FHL-1 absorption assay.
T. denticola ATCC 35405 and B. burgdorferi B31MI (control) cells from 1 ml of a dense culture (
109 cells) were recovered by centrifugation (5,000 x g, 10 min, 4°C), washed with cold PBS, resuspended in 200 µl cold PBS containing factor H/FHL-1 (0.525 mg ml1), and incubated for 1 h at room temperature. The cells were recovered by centrifugation (3,000 x g, 5 min, room temperature), washed twice with cold PBS, solubilized in sodium dodecyl sulfate (SDS)-polyacrylamide gel electrophoresis (PAGE) sample buffer, electrophoresed, and immunoblotted. The membranes were then screened using the affinity ligand binding immunoblot (ALBI) assay with and without addition of factor H/FHL-1 as described below.
ALBI assays and immunoblot analyses.
Cell lysates of T. denticola were prepared by solubilization in SDS-PAGE sample buffer and boiling. The proteins were separated and analyzed by SDS-PAGE using 15% polyacrylamide precast gels (Bio-Rad). Equal loading of proteins was assessed by Coomassie blue staining. Proteins were transferred onto Immobilon P membranes (Millipore) by electroblotting as previously described (24). Factor H/FHL-1 or SCR ALBI assays were conducted as previously described previously (29) using a preparation of purified human factor H (Calbiochem) or purified recombinant SCR constructs (9). The commercial factor H preparation, as reported by the supplier, contained approximately 95% factor H and 5% FHL-1. In the ALBI assay bound factor H/FHL-1 was detected using goat anti-human factor H antiserum (1:800 dilution; Calbiochem) with horseradish peroxidase-conjugated rabbit anti-goat immunoglobulin (IgG) antibody as the secondary antibody (1:40,000 dilution; Pierce). The goat anti-human factor H antiserum detected factor H, FHL-1, and all SCR constructs used in these analyses. The three SCR constructs analyzed spanned SCRs 1 to 7 (H7), SCRs 8 to 15, and SCRs 16 to 20. These constructs were generated as part of a previous study by Duthy et al. (9). Briefly, the SCRs of interest were PCR amplified, cloned into the yeast expression vector pPICZ
(Invitrogen), expressed in Pichia pastoris, and purified by immunoaffinity chromatography.
Heparin inhibition assays. Immunoblot strips of T. denticola ATCC 35405 cell lysates were prepared as described above. The SCR 1 to 7 construct, H7, was preincubated with or without heparin (1 µg ml1) in 5% skim milk, PBS with 0.02% Tween 20 (PBS-T) for 30 min at room temperature before addition to the T. denticola membrane strip for 1 h at room temperature. The blot was washed with PBS-T for 30 min with three changes of buffer and then analyzed for factor H/FHL-1 binding using the ALBI assay described above.
IFAs. For indirect immunofluorescence assays (IFAs) slides were prepared and general procedures were performed as previously described (37). To determine if FHL-1 bound to the surface of the spirochetes, cells were recovered from a dense culture of T. denticola by centrifugation (5,000 x g, 5 min), washed with PBS, pelleted by centrifugation (10,000 x g, 20 min), and resuspended in 1 ml PBS with 10% fetal goat serum (PBS-FGS). The motility and hence viability of the cells were confirmed by dark-field microscopy. Purified factor H/FHL-1 was added to the cells to a final concentration of 10 ng µl1, and the cells were incubated at 37°C for 1 h with occasional gentle mixing. The cells were washed with PBS-FGS to remove unbound factor H/FHL-1, resuspended in 25 µl PBS-FGS, and placed on prepared slides. Bound FHL-1 was detected using goat anti-human factor H antisera (1:10 dilution; Calbiochem) and ALEXA 488-conjugated rabbit anti-goat IgG antibody (1:2,000 dilution; Molecular Probes). As a control to verify that the outer membrane was not disrupted by these procedures, a second slide was stained for the periplasmic protein FlaA. FlaA was detected by incubation with rabbit anti-FlaA (a kind gift from Chris Fenno) at a dilution of 1:10,000, followed by incubation with ALEXA 488-conjugated goat anti-rabbit IgG antibody (1:2,000 dilution). As a final control, T. denticola cells were acetone fixed and permeabilized before they were screened with the anti-FlaA antiserum as described above. Images were captured using a MagnaFire camera and software (Olympus).
C3b cleavage assay. The ability of factor H/FHL-1 bound to T. denticola ATCC 35405 to cleave C3b was assessed using a C3b cleavage assay described previously (23). In brief, cultures of T. denticola were pelleted, washed with ice-cold PBS, resuspended in cold PBS with 10 mM MgCl2, and incubated with 0 or 50 ng of purified human factor H/FHL-1 for 1 h at 37°C. The cells were washed with PBS to remove unbound factor H/FHL-1. Factor I (150 ng; Calbiochem) and C3b (250 ng; Calbiochem) were then added, and the mixture was incubated for 2 h at 37°C. The samples were fractionated by SDS-PAGE, immunoblotted, and screened with anti-human C3b antiserum (1:800 dilution; Accurate). The immunoblot methods used have been described previously (25). As additional controls for the reaction conditions employed, various combinations of purified factor H/FHL-1 (150 ng), factor I (150 ng), and/or C3b (250 ng) were incubated at 37°C in PBS for 2 h. In addition, T. denticola and B. burgdorferi were incubated as described above with factor I, factor H/FHL-1, or both omitted from the reaction. The reaction products were analyzed by SDS-PAGE and Coomassie blue staining.
|
|
|---|
37-kDa protein were absorbed by T. denticola (Fig. 1A). The 37-kDa protein may have been FHR-1 or, alternatively, a degradation product of FHL-1 generated by one of the many proteases produced by T. denticola (5, 6, 21). Since reagents specific for FHR-1 are not available, the identity of this protein could not be determined. Verification that the anti-factor H/FHL-1 antiserum was specific and was not binding to treponeme proteins came from the demonstration that T. denticola that was incubated without factor H/FHL-1 did not react with the antiserum. It is important to note that in spite of the higher concentration of factor H in the assay mixture, no detectable binding of factor H was observed. FHL-1 was significantly concentrated by absorption, as shown by the fact that it was only weakly detected in the control lane of the purified factor H/FHL-1 preparation. In contrast to the results observed with T. denticola, B. burgdorferi absorbed predominantly factor H, indicating that there was a striking difference in the specificity of binding to different members of the factor H family by these spirochetes.
![]() View larger version (45K): [in a new window] |
FIG. 1. Detection of an FHL-1 binding protein in T. denticola ATCC 35405. To determine if factor H or FHL-1 or both can bind to T. denticola, absorption assays were performed. Whole cells were incubated with purified factor H/FHL-1, recovered by centrifugation, washed to remove unbound ligand, solubilized, and immunoblotted, and bound factor H/FHL-1 was detected by immunoblotting using anti-factor H/FHL-1 antiserum (A). All methods are described in the text. B. burgdorferi B31MI and purified factor H/FHL-1 served as positive controls for absorption and immunoblot detection, respectively. The abilities of different T. denticola strains (indicated above the lanes) to bind FHL-1 and the molecular mass of the binding protein were determined using the ALBI assay (B). In brief, cell lysates of each strain were fractionated by SDS-PAGE and immunoblotted. The blots were incubated with purified factor H/FHL-1 and then screened with anti-factor H/FHL-1 antiserum. B. burgdorferi B31MI, which produces multiple factor H binding proteins (BBA68 and OspE), served as the positive control. The positions of molecular mass markers are indicated on the right.
|
Demonstration that FhbB of T. denticola ATCC 35405 binds to SCR 7 and that this interaction is mediated by charged residues within SCR7. To further assess the specificity of the interaction of FhbB with FHL-1 and to determine if SCRs 8 to 20 (which are not part of FHL-1) have the potential to bind to FhbB, recombinant SCR constructs spanning SCRs 1 to 7 (H7), 8 to 15, and 16 to 20 were employed. Only H7 was found to bind to FhbB (Fig. 2A). This provided further support for the unique specificity of the interaction of FhbB with FHL-1 but not factor H. Weak binding of the H7 construct to one or more proteins with molecular masses of approximately 42 kDa was also observed. These proteins may have been additional FHL-1 binding proteins, possibly trimers of FhbB, or simply may have represented nonspecific background.
![]() View larger version (27K): [in a new window] |
FIG. 2. Demonstration that SCRs 1 to 7 bind to the FhbB protein of T. denticola ATCC 35405 and that binding is dependent on charged residues within SCR 7 and inhibited by heparin. To determine which SCRs of factor H/FHL-1 can bind to T. denticola, recombinant SCR constructs were used to screen immunoblot strips using the ALBI assay format (A). The SCR constructs used to screen the blots are indicated above the blots. The effects of charged residues within SCR 7 on binding to T. denticola were assessed using a site-directed mutant of the SCR 1 to 7 construct, H7AB. The influence of heparin on SCR1 to 7 binding was determined by preincubating the H7 construct with (+) or without () heparin before immunoblot strips of T. denticola lysate were screened using the ALBI assay (B).
|
Inhibition of FHL-1 binding to FhbB by heparin. Since the charged residues altered in H7AB also mediate heparin binding, we determined whether heparin can inhibit the binding of the H7 construct to FhbB. Immunoblot strips of T. denticola lysate were screened with H7 that had been preincubated with or without heparin, and binding was assessed using the ALBI approach. Heparin completely inhibited the binding of H7 to FhbB (Fig. 2B). The inhibition of FHL-1 binding to FhbB by heparin, which has been shown to bind to SCR 7, provides additional support for the hypothesis that FhbB binds directly to SCR 7.
Demonstration that FhbB of T. denticola is surface exposed. To indirectly demonstrate that FhbB of T. denticola is surface exposed, the ability of intact cells to bind FHL-1 to their surfaces was assessed using indirect immunofluorescence (Fig. 3). Unfixed cells readily bound FHL-1, indicating that the FHL-1 binding protein is surface exposed. As a control, cells were also screened with antiserum to the FlaA protein, which is an inner membrane-anchored protein that resides primarily in the periplasm. No binding to FlaA was observed in unfixed cells, but binding was observed in acetone-fixed (permeabilized) cells.
![]() View larger version (50K): [in a new window] |
FIG. 3. Demonstration of FHL-1 binding to the surface of T. denticola ATCC 35405 determined by IFAs. IFAs were performed as described in the text using unfixed and acetone-fixed cells (panels A and B, respectively). The antiserum used in the IFA is indicated below each image where appropriate. The images in panels A and B were obtained with a x100 (oil immersion) objective. The dark-field image is presented for each preparation for reference to indicate the location of the spirochetes.
|
![]() View larger version (31K): [in a new window] |
FIG. 4. Demonstration that the FHL-1 binding protein of T. denticola ATCC 35405 is loosely associated with the cell surface. To assess the nature of the interaction of FhbB with the T. denticola cell surface, T. denticola cells were subjected to one, two, three, or four washes with PBS after recovery from culture media. Two blots were generated; one was screened for FlaA protein by immunoblotting (A), and the other was screened for FHL-1 binding using the ALBI assay (B). B. burgdorferi (Bb) B31MI served as the positive control in the ALBI assay. The positions of molecular mass standards are indicated on the right.
|
![]() View larger version (55K): [in a new window] |
FIG. 5. Demonstration of FHL-1-independent C3b cleavage by T. denticola ATCC 35405. T. denticola ATCC 35405 and B. burgdorferi B31MI were incubated with or without factor H/FHL-1 (fH/FHL-1), as indicated above the lanes. Unbound ligand was removed by washing with PBS. The cells were then incubated with or without factor I (fI) and/or C3b as indicated above the lanes, analyzed by SDS-PAGE, immunoblotted, and screened with anti-C3b antiserum. Additional controls in which various combinations of purified C3b, factor I, and/or factor H/FHL-1 were combined and treated as described above were also included. All methods are described in the text.
|
|
|
|---|
As a first step in assessing the binding of complement regulatory proteins to T. denticola a whole-cell absorption assay was performed. Viable cells were incubated with a purified factor H/FHL-1 preparation that consisted of 95% factor H and 5% FHL-1 (as determined by the supplier). It has not been determined if other members of the factor H family, such as the FHR proteins, also copurify with factor H. After incubation of T. denticola with factor H/FHL-1, the cells were washed and then analyzed by SDS-PAGE and immunoblotting. Screening of the immunoblot with the anti-factor H/FHL-1 antiserum demonstrated that the molecular masses of the proteins bound by T. denticola were approximately 43 and 37 kDa. It is striking that in spite of its higher concentration, no factor H (150 kDa) was absorbed by T. denticola. In contrast, factor H, but not FHL-1, was readily absorbed by B. burgdorferi. The absorption of 37- and 43-kDa proteins suggests that FhbB not only binds to FHL-1 but may also bind to other members of the factor H family of proteins, possibly FHR-1. FHR-1 exists as two forms, FHR-1
(37 kDa) and FHR-1ß (43 kDa), and the difference in mass is due to differences in carbohydrate modification (10). However, it is equally plausible that the smaller bands observed are simply FHL-1 degradation products. Based on the intensity of the signal observed when the blot was screened with anti-factor H/FHL-1 antiserum, it is evident that the stoichiometry of FHL-1 binding to T. denticola is relatively high, as the cells significantly concentrate this protein. It is noteworthy that the control for these analyses, B. burgdorferi B31MI, bound predominantly, if not exclusively, factor H. Alitalo and colleagues reported that the B. burgdorferi IA strain bound both factor H and FHL-1 (2). However, other isolates in the report of these workers bound only factor H, and based on this finding and the data presented here it is appears that FHL-1 binding may vary between Lyme disease spirochete strains. Since factor H and FHL-1 can have distinct functional roles, it is likely that Borrelia and T. denticola exploit the binding of complement regulatory proteins for different purposes.
The number, mass, and distribution among isolates of the T. denticola FHL-1 binding proteins were determined using the ALBI assay. An FHL-1 binding protein with a molecular mass of 14 kDa was detected in all T. denticola strains tested and was designated FhbB (for FHL-1 binding protein B). A functionally related protein, FhbA, has been identified in the relapsing fever spirochetes (18), and hence the designation FhbB is intended to be consistent with bacterial protein nomenclature guidelines, to reflect functional activity, and to provide consistency in the nomenclature of factor H/FHL-1 binding proteins.
The data presented above strongly suggest that FhbB specifically binds to FHL-1 but not factor H. To verify this, recombinant proteins consisting of SCRs 1 to 7, 8 to 15, and 16 to 20 were tested for the ability to bind to FhbB. Only H7 bound to T. denticola. As described above, FHL-1 is comprised of the first seven SCRs of factor H plus four additional C-terminal residues. The FhbA protein of Borrelia hermsii (19) and the group A streptococcal M and Fba proteins also have been reported to bind specifically to SCRs 1 to 7 (13, 32). Similar to results obtained for the M and Fba proteins, heparin inhibited the binding of H7 to T. denticola. Previous studies identified interaction sites for heparin within factor H SCRs 7, 12, 13, 14, and 20 (47). Hence, the ability of heparin to inhibit FHL-1 binding to FhbB is consistent with the localization of both FhbB and heparin interaction sites within SCR 7 of FHL-1.
Previous analyses of the molecular interaction between factor H and the M protein of group A streptococcus using an SCR 1 to 7 mutant designated H7AB demonstrated that charged residues at specific sites in SCR 7 are directly or indirectly involved in binding (13). In the H7AB mutant, specific charged residues in SCR 7 were replaced by alanine. The H7AB mutant was found to be incapable of binding to the M protein. In this study, we demonstrated that H7AB also could not bind to FhbB. This finding further confirms the specific involvement of SCR 7 in binding and the importance of positively charged residues in the FHL-1/FhbB interaction.
For FHL-1 binding to FhbB to be of biological significance, FhbB would need to be exposed on the surface of intact cells. To assess this, several different approaches were employed. First, intact cells were subjected to treatment with proteinase K, which should degrade surface proteins but not internal proteins. This approach has been successfully employed to demonstrate the surface exposure of several spirochete proteins, including FhbA (factor H binding protein A) of B. hermsii ((18). While treatment with proteinase K led to complete elimination of FHL-1 binding by T. denticola (data not shown), some digestion of the inner membrane-anchored, periplasmic FlaA protein was also observed. This suggests that the integrity of the outer membrane was compromised and that the outer membrane of T. denticola is labile and fragile. The fragility of the outer membrane and the apparent loose association of FhbB with the cell surface were confirmed by analysis of the FHL-1 binding ability of T. denticola cells that had been subjected to increasing numbers of gentle washes with PBS. With each successive wash, the amount of FHL-1 bound by the cell lysate proteins derived from the washed cells decreased significantly, indicating that FhbB is easily removed by washing. This observation suggests that FhbB is loosely associated with the cell surface. Surface exposure and outer membrane localization of FhbB were further confirmed by IFA analyses of unfixed cells. Direct binding of FHL-1 to the cell surface was readily demonstrated, and since FhbB is the dominant, if not only, FHL-1 binding protein produced by T. denticola, it can be concluded that FhbB is at least partially surface exposed.
The potential of T. denticola surface-bound FHL-1 to participate as a cofactor in the factor I-mediated cleavage of C3b was also assessed in this study. Factor I is a serine protease that cleaves C3b at its serine residues, yielding a specific cleavage pattern (14, 26). The C3b cleavage assay employed here was previously employed by McDowell and colleagues to demonstrate the complement regulatory activity of factor H bound to the relapsing fever spirochetes B. hermsii and Borrelia parkeri and the Lyme disease spirochete, B. burgdorferi (23). When factor H/FHL-1 was incubated with T. denticola and then tested for its ability to cleave C3b in the presence of factor I, the resulting cleavage patterns were atypical and suggested that cleavage was occurring at non-Ser residues. C3b cleavage was also observed when C3b was incubated with T. denticola and factor H/FHL-1 without factor I, demonstrating that C3b cleavage by T. denticola is not FHL-1 and factor I dependent. Instead, C3b may be targeted by one or more of the proteases produced by T. denticola (34). While this observation does not rule out a role for surface-bound FHL-1 in C3b cleavage, it suggests that the main biological function of FHL-1 binding by T. denticola may not be related to complement circumvention.
In summary, T. denticola produces a novel protein, FhbB, that specifically binds FHL-1 and not factor H. FHL-1 has been demonstrated to be present on anchorage-dependent cell types, where it binds to integrin receptors, and to interact with the extracellular matrix through SCR 4 (15). Our hypothesis is that T. denticola binds to host cell surface-bound FHL-1 via its FhbB protein and that this interaction facilitates adherence, biofilm formation, and possibly tissue penetration. Additional studies are now under way to further characterize FhbB and to define its relative contribution to the molecular pathogenesis of T. denticola and periodontal disease.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»