Previous Article | Next Article ![]()
Infection and Immunity, January 2006, p. 481-487, Vol. 74, No. 1
0019-9567/06/$08.00+0 doi:10.1128/IAI.74.1.481-487.2006
Copyright © 2006, American Society for Microbiology. All Rights Reserved.
Department of Primary Industries, Elizabeth Macarthur Agricultural Institute, Camden, New South Wales 2570,1 School of Biological Sciences, University of Wollongong, Wollongong, New South Wales 2522, Australia,2 Department of Veterinary Microbiology and Preventive Medicine, Iowa State University, Ames, Iowa 500113
Received 30 June 2005/ Returned for modification 24 August 2005/ Accepted 13 October 2005
|
|
|---|
|
|
|---|
Studies have shown that the cilium adhesin P97 is essential for the adherence of M. hyopneumoniae and the onset of disease (15, 37). The cilium adhesin gene (mhp183) encodes a 126-kDa preprotein. The full-length protein is barely present in in vitro-grown cells due to posttranslational processing. A major cleavage event at position 195 generates the functional adhesin (P97) and the N-terminal fragment (P22). P97 is further cleaved to yield a host of other peptides (10). While the functions of these peptides (apart from P97) are unknown, proteomic and immunogold studies demonstrate that they remain associated with the cell surface or the surrounding matrix (10).
Like several other characterized mycoplasma adhesins, P97 contains repetitive elements within the C-terminal portion of its amino acid sequence (4, 8, 15). P97 contains two such repeat regions, designated R1 and R2, with R1 (sequence AAKPV/E) being identified as the cilium-binding epitope (16). Size variation in the cilium adhesin protein of different M. hyopneumoniae strains (95 to 97 kDa) has been accounted for by differences in the number of copies of R1, which varies from 9 in the nonadherent J strain to 15 in the pathogenic 232 strain (35). A minimum of eight copies of the R1 repeat is necessary for cilium binding, but this is not sufficient to confer the ability to adhere in vivo (16, 23). These data suggest that there are additional proteins and mechanisms involved in adherence to host epithelia.
The importance of binding to host extracellular matrix (ECM) components in initiating pathogenic processes has been well documented. By binding to ECM proteins such as fibronectin, vitronectin, laminin, and collagen, pathogenic microbes are able to mediate interactions with host cells (27) and, in some cases, enhance their invasive potential (12, 18, 28). Furthermore, it has been demonstrated that many pathogens are able to recruit exogenous glycosaminoglycans (e.g., heparin, heparan sulfate, and chondroitin sulfate B) to their surfaces to facilitate interactions between the pathogen and host ECM components, which are themselves glycosaminoglycan-binding proteins (13, 21, 34). Binding to glycosaminoglycans is also believed to enable pathogenic bacteria to evade the host immune system (7, 12) and modulate the inflammatory response (13) by allowing bridging interactions with host chemokines and cytokines. Thus, glycosaminoglycan-binding proteins are considered to be of central importance to the infection process.
Previous experiments have revealed that adherence of purified recombinant P97 to cilia is inhibited by sulfated glycosaminoglycans (15). These findings suggest a possible interaction between the P97 protein and sulfated glycosaminoglycans, which may act as receptor analogs for the M. hyopneumoniae adhesin (15, 36, 38); however; these studies did not directly demonstrate such an interaction. Furthermore, the domains within the cilium adhesin responsible for this interaction were not identified. In this study, we identify regions within the cilium adhesin that interact with the glycosaminoglycan heparin. The ability of M. hyopneumoniae cell surface molecules to bind heparin may play a significant role in the pathogenesis of this organism.
|
|
|---|
DNA extraction. Chromosomal DNA was extracted from the J strain of M. hyopneumoniae by a phenol-chloroform method, followed by dialysis against TE buffer as described previously (11). Plasmid DNA was extracted from E. coli with either the QIAGEN mini-prep or midi-prep kit according to the manufacturer's instructions (QIAGEN, Alameda, Calif.).
Plasmid constructs. Adhesin molecules from two different strains of M. hyopneumoniae were used to generate polyhistidine fusion proteins of different regions of the coding sequence. Because UGA codons encode tryptophan in mycoplasmas, they cause translation problems in E. coli, resulting in premature stops during the expression of cloned sequences. To circumvent this problem, three clones were generated by amplifying chromosomal DNA from strain J with PCR primers designed to avoid in-frame TGA codons. An additional construct was generated with a clone containing a large fragment of the P97 sequence from strain P5722 (19) in which the TGA codons had been mutagenized to TGGs. This approach was deemed valid because the sequence difference between these two P97 homologs is less than 4%, with most of the difference accounted for by variation in the number of R1 and R2 repeats.
The first construct contained the region coding for the N terminus of the cilium adhesin (amino acids 106 to 758 of the mutagenized gene sequence) and was referred to as F1P97. The PCR template for this construct was pISM405, in which the TGA codons had been converted to TGGs (10). The second construct, referred to as F2P97 (amino acids 768 to 1069 of the J strain sequence), contained the cilium adhesin repeat domains coding for both R1, the cilium-binding epitope, and R2. This gene fragment was further subcloned to yield two additional constructs referred to as F3P97 (amino acids 768 to 914 of the J strain sequence) and F4P97 (amino acids 935 to 1069 of the J strain sequence), which contained the R1 and R2 regions, respectively (Fig. 1).
![]() View larger version (27K): [in a new window] |
FIG. 1. (A) Diagrammatic representation of the cilium adhesin gene. Arrows indicate the locations of primers used to amplify DNA fragments coding for F1P97 to F4P97. Amino acid (aa) positions corresponding to the N and C termini of F1P97 to F4P97 are indicated. Numbers marked with asterisks indicate positions corresponding to the cilium adhesin of M. hyopneumoniae strain P5722 (GenBank accession no. AAB03497); all other numbers correspond to the cilium adhesin of M. hyopneumoniae strain J (GenBank accession no. AAC35402). The F1P97 to F4P97 adhesin fragment sizes are indicated. (B) SDS-polyacrylamide gel showing the purified, recombinant F1P97 to F4P97 cilium adhesin fragments. Lane 1, prestained protein molecular weight marker (MBI Fermentas, Hanover, Maryland; band sizes correspond to 118, 86, 47, 34, 26, and 19 kDa); lane 2, F1P97; lane 3, F2P97; lane 4, F3P97; lane 5, F4P97. All cilium adhesin fragments run at higher molecular weights than predicted due to abnormal migration patterns.
|
according to the manufacturer's instructions. All plasmid constructs were confirmed via DNA sequencing. Protein expression and purification. All cilium adhesin fragments were expressed as hexahistidyl fusion proteins and purified by nickel affinity chromatography. Briefly, E. coli M15(pREP4) cells were grown to mid-log phase and induced with a final concentration of isopropyl-ß-D-thiogalactopyranoside of 1 mM. Cells were harvested by centrifugation (4,000 x g for 20 min) and then lysed in 8 M urea buffer (8 M urea, 0.01 M Tris, 0.1 M NaH2PO4, pH 8.0) with gentle rocking for 1 h. Cell debris was pelleted by centrifugation at 10,000 x g for 30 min. To the supernatant, 0.25 volume of a 50% Ni-nitrilotriacetic acid slurry (QIAGEN) was added and the solution was allowed to mix gently for 1 h. The solution was loaded onto a glass column and washed twice with 8 M urea buffer (pH 6.3) to remove unbound protein. Bound protein was eluted with low-pH urea buffers (pH 5.9 and pH 4.5). Proteins were analyzed for purity by sodium dodecyl sulfate (SDS)-polyacrylamide gel electrophoresis and then dialyzed for 48 h with multiple buffer changes against phosphate-buffered saline (PBS; 10 mM sodium phosphate, 150 mM sodium chloride, pH 7.4)-0.1% SDS or PBS-5% glycerol to remove the urea. The concentration of the purified proteins was estimated by the Bradford assay (Bio-Rad Laboratories).
Production of polyclonal antisera. Antisera to the F1P97 to F4P97 adhesin fragments were generated via primary and secondary intramuscular injections of antigen into New Zealand White rabbits at 2-week intervals. Antigens (approximately 0.5 mg) were prepared for injection by mixing equal volumes of purified protein (approximately 500 µl) and Freund's incomplete adjuvant (Sigma Aldrich, St. Louis, Missouri). Preimmune serum was collected prior to the primary injection and served as control antiserum. A trial bleeding was performed 10 to 14 days after the secondary injection of antigen, and immune responses to the antigen at this stage were assessed via immunoblotting. Positive sera were collected via cardiac bleeding, during which the rabbits were anesthetized and euthanized as previously described (32).
Heparin-binding assays. For ligand dot blot assays, purified proteins were diluted to 5 µg/ml in PBS. To denature samples, proteins were diluted in cracking buffer (60 mM Tris, pH 6.8, 1% SDS, 1% ß-mercaptoethanol, 10% glycerol) and boiled for 5 min. A 100-µl volume of each sample was spotted onto a Hybond-C super nitrocellulose membrane (Amersham Pharmacia Biotech, Uppsala, Sweden) that had been prewetted in Tris-buffered saline (TBS; 10 mM Tris, 150 mM sodium chloride, pH 7.4) with a Bio-Dot microfiltration apparatus (Bio-Rad Laboratories). The membrane was blocked with 300 µl per well of blocking solution (1% bovine serum albumin [BSA] in TBS) and then washed twice under vacuum with 300 µl per well of TTBS wash solution (0.05% Tween 20 in TBS). The membrane was removed from the manifold and placed in a dish containing 100 µg/ml biotinylated heparin (Sigma) diluted in 1% BSA-TTBS. The membrane was incubated for 1 h with gentle rocking and then washed 3 x 10 min in TTBS. Streptavidin peroxidase (Roche) was diluted 1:3,000 in 1% BSA-TTBS and added to the membrane. After 1 h of incubation, the blot was washed 3 x 10 min with TTBS. The membrane was equilibrated with 100 mM Tris (pH 7.6) and developed with 3,3'-diaminobenzidine (Sigma) solution. To ensure that equivalent amounts of protein had been blotted in each position, a duplicate blot was stained with amido black protein stain (0.1% amido black, 7% [vol/vol] acetic acid) immediately after spotting of the proteins onto nitrocellulose.
For microtiter plate binding assays, 96-well plates (Linbro/Titertek; ICN Biomedicals Inc., Aurora, Ohio) were coated overnight in a humidified chamber with 0.5 µg per well purified protein diluted in 100 µl carbonate coating buffer (18 mM NaHCO3, 27 mM Na2CO3, pH 9.5). Following overnight incubation, the plates were washed five times with PBS-0.2% Tween 20 (200 µl wash solution per well) with an automatic 96PW plate washer (SLT Labinstruments, Crailsheim, Germany). The wells were blocked with 100 µl of blocking solution (2% skim milk in PBS) for 1 h in a humidified chamber. The plates were washed five times, and biotinylated heparin which had been prediluted in 1% skim milk-PBS was added in increasing concentrations to the wells. Final concentrations of biotinylated heparin were 0, 1, 5, 10, 20, 50, and 100 µg/ml. Aliquots of 100 µl of each concentration were added to microtiter plate wells; the plates were then incubated for 1 h. After washing the plates as described above, 100 µl of streptavidin-peroxidase (Roche) diluted 1:3,000 in 1% skim milk-PBS was added to each well and the mixture was incubated for 1 h. The plates were washed and developed with 1 mM 2,2'-azinobis (3-ethylbenzothiazoline-6-sulfonic acid) substrate (Sigma) in citrate buffer (100 mM citric acid, 200 mM Na2HPO4, pH 4.2) which had been activated with hydrogen peroxide. Plates were developed with shaking on a Titramax 1000 microtiter plate shaker (Heidolph, Schwabach, Germany), and the optical density at 414 nm was measured with a Multiskan Ascent plate reader (Thermo Labsystems, Franklin, Mass.) at 7-, 15-, 25-, and 45-min intervals.
Microtiter plate assays for determining the specificity of heparin binding were performed as described above but with serial twofold dilutions of biotinylated heparin, beginning at a saturating concentration (100 µg/ml for F1P97 and 50 µg/ml for F2P97), each of which was premixed with a 50-fold excess of unlabeled heparin prior to addition to the plates.
Competitive-binding assays were also performed as above but with the addition of a 1-, 5-, 10-, 20-, 30-, 40-, or 50-fold excess of a range of sulfated polysaccharides. Inhibitors were premixed with biotinylated heparin immediately prior to addition to the wells and included unlabeled heparin, fucoidan, mucin, and chondroitin sulfate B (Sigma). In all microtiter plate assays, controls were performed with uncoated wells, wells where no heparin was added, or wells where no streptavidin-peroxidase was added. Controls which employed protein-specific antiserum and horseradish peroxidase-labeled anti-rabbit immunoglobulin G (Chemicon, Temecula, Calif.) were also conducted to ensure that proteins were adhering to the microtiter plate wells. All experiments were performed in triplicate. Results were graphed by GraphPad Prism version 4.02 for Windows (GraphPad Software, San Diego, Calif.; www.graphpad.com) by nonlinear regression.
|
|
|---|
![]() View larger version (86K): [in a new window] |
FIG. 2. Amino acid sequences of F1P97 to F4P97. The sequences shown correspond to the M. hyopneumoniae strains and numbering described in Fig. 1A. F3P97 and F4P97 are indicated by large boxes. Small boxes indicate motifs matching the heparin-binding consensus sequences. Basic residues are shaded. Tryptophan residues that represent mutagenized TGG codons are underlined. Repeat regions 1 and 2 (R1 and R2) are italicized and underscored.
|
![]() View larger version (24K): [in a new window] |
FIG. 3. Dot blot assay of denatured and undenatured cilium adhesin fragments reacted with biotinylated heparin (A) and stained with amido black (B). Position 1, undenatured F1P97; position 2, denatured F1P97; position 3, undenatured F2P97; position 4, denatured F2P97; position 5, undenatured F3P97; position 6, denatured F3P97; position 7, undenatured F4P97; position 8, denatured F4P97.
|
![]() View larger version (16K): [in a new window] |
FIG. 4. Binding of biotinylated heparin to immobilized cilium adhesin domains F1P97 (), F2P97 ( ), F3P97 ( ), and F4P97 ( ). Increasing concentrations of biotinylated heparin were added until saturation was reached. Absorbances were read after 45 min of incubation in the presence of substrate. Error bars indicate the standard deviation from the mean for triplicate readings. Replicate experiments resulted in similar binding curves.
|
![]() View larger version (17K): [in a new window] |
FIG. 5. Heparin-binding curves for F1P97 (A) and F2P97 (B) showing total binding (), nonspecific binding ( ), and specific binding ( ). Total binding was determined by the standard microtiter plate assay protocol, while nonspecific binding was determined in the presence of a 50-fold excess of unlabeled heparin. The specific binding curves were derived by subtracting the nonspecific binding data from the total binding data. Error bars indicate the standard deviation from the mean for triplicate readings.
|
![]() View larger version (18K): [in a new window] |
FIG. 6. Competitive-binding assays showing inhibition of heparin binding to F1P97 (A) and F2P97 (B) by various sulfated polysaccharides, i.e., unlabeled heparin (), fucoidan ( ), mucin ( ), and chondroitin sulfate B ( ). Microtiter plate binding assays were performed by the standard protocol but with an excess of each inhibitor. Error bars indicate the standard deviation from the mean for triplicate readings.
|
|
|
|---|
In this study, two nonoverlapping regions of the M. hyopneumoniae cilium adhesin, F1P97 and F2P97, were shown to bind heparin in a dose-dependent, saturable manner. These results indicate that there are at least two distinct heparin-binding domains within the adhesin protein. Both of these regions contain clusters of basic amino acids that match the consensus for glycosaminoglycan-binding motifs (6). One of these protein regions, F2P97, contains both of the cilium adhesin repeat regions, R1 and R2. The heparin-binding consensus motif of F2P97 lies within the F3P97 region (Fig. 1A), which suggests that F3P97 should also bind heparin. As F3P97 was not shown to bind heparin in either the ligand blot or the microtiter plate assay, it must be concluded that the heparin-binding motif in F2P97 alone was not sufficient to confer binding activity, indicating that additional sequences are required. F4P97 also failed to show any significant interaction with heparin in microtiter plate assays, indicating that while R1 and R2 are unable to bind heparin independently, the intact F2P97 fragment (containing both of these regions) displays heparin-binding activity. The fact that both of the cilium adhesin repeat regions are required for heparin binding suggests that this interaction is conformation dependent rather than due to the presence of a specific linear amino acid motif. Furthermore, the idea that protein conformation plays a role in heparin binding is supported by the ligand blot assay data, which demonstrated that undenatured F1P97 and F2P97 were able to bind heparin while the denatured forms were unable to do so.
Alternatively, since 20 amino acids (914 to 935) were omitted during the construction of F3P97 and F4P97, it is possible that this sequence may be responsible for the heparin-binding activity observed for F2P97. However, an analysis of this sequence failed to identify a heparin-binding motif or a basic amino acid density that might facilitate binding.
Homologues of the cilium adhesin Mhp183 among different M. hyopneumoniae strains are highly conserved, with the majority of sequence changes resulting from variations in the number of repeats within the R1 and R2 regions. Because these repeat regions are contained within the heparin-binding F2P97 fragment, the cilium adhesins from different strains of M. hyopneumoniae might be expected to bind heparin with various affinities. The M. hyopneumoniae J strain used in this study has a cilium adhesin with only nine copies of the R1 repeat, while pathogenic strains have been shown to contain up to 15 copies. An increase in the number of copies of R1 may therefore confer an even greater affinity for heparin since this repeat is rich in basic residues. Further experiments are required to confirm this.
Studies on the proteolytic cleavage of Mhp183 have revealed a complex processing pattern. One major processing event cleaves an N-terminal 22-kDa fragment (P22), generating the "mature" P97 adhesin (10, 37). A second major event (at position 862 for the J strain) removes a C-terminal 28-kDa fragment (P28) that separates the cilium-binding epitope, R1, from R2. This event generates a central adhesin fragment that contains R1 and is approximately 66 kDa in size (P66) (10). Since both R1 and R2 are necessary for the F2P97 fragment of the adhesin to bind heparin, the cleavage event that generates P28 is likely to have an impact on the ability of some cilium adhesin cleavage products to bind glycosaminoglycans. However, this cleavage event may not have a detrimental effect on the ability of P66 to bind heparin since this is likely to be conferred by the second heparin-binding site found in F1P97. The presence of two distally located heparin-binding sites may allow M. hyopneumoniae to alter its surface architecture without a corresponding loss of heparin-binding activity.
For some proteins, the ability to bind heparin has been attributed to the presence of relatively high numbers of evenly spaced basic amino acid residues rather than the presence of specific linear motifs (20, 29). The positively charged basic residues are believed to interact with the exposed, negatively charged sulfate groups of heparin and other glycosaminoglycans (5, 6, 20). This may also be true of cilium adhesin regions F1P97 and F2P97, which are relatively rich in lysine residues. Further evidence for this type of interaction can be derived from competitive-binding assays. Binding of both F1P97 and F2P97 to heparin was disrupted by the addition of fucoidan, a highly sulfated fucose polymer derived from marine algae, but not by chondroitin sulfate B. While not present in mammalian systems, fucoidan is useful in binding studies due to the high degree of sulfation of its carbohydrate chains and for this reason is frequently found to be a potent inhibitor of protein-heparin interactions (14, 24). The strong inhibition of heparin binding by fucoidan highlights the significance of sulfate groups in this interaction.
Mucin, another highly sulfated compound, was also found to be a powerful inhibitor in our competitive-binding assays. Mucins are abundant in the mucosal secretions lining various epithelial surfaces (25). Thus, the ability of the cilium adhesin fragments to bind mucin may in itself be highly significant, since the mucosal layer is often considered the first defense against pathogens that colonize epithelial surfaces (1). Interactions with the mucous layer of the respiratory tract would likely precede binding of M. hyopneumoniae to cilia; therefore, binding to mucins may represent an important first step in the pathogenesis of this organism. Further studies are required to characterize this interaction.
The binding affinities of both F1P97 (0.27 ± 0.02 µM) and F2P97 (1.89 ± 0.33 µM) for heparin are within the range reported for other heparin-binding proteins (0.3 nM to 4 µM) such as antithrombin (2), interleukin-2 and -12 (14, 24), clusterin (26), and the mycobacterial heparin-binding hemagglutinin (29), suggesting that these interactions are of physiological significance. The ability of the M. hyopneumoniae cilium adhesin to bind to components of the ECM, as well as to cilia, indicates that this molecule plays a multifunctional role in adherence to the porcine respiratory tract. While more experiments are required to establish the precise role of the adhesin's interaction with glycosaminoglycans in vivo, studies of microbial pathogenesis continue to highlight the importance of binding to heparin and other sulfated polysaccharides in the establishment, maintenance, and dissemination of infection (13, 21, 27, 34). Many pathogens, including Neisseria, Yersinia, and Staphylococcus species, exploit the widespread ability of host proteins to bind heparin. By recruiting heparin to their surfaces, these organisms acquire the ability to interact with a multitude of host molecules and circumvent the need for individual ligand receptors (13). For organisms such as M. hyopneumoniae, which have small genomes and therefore a limited repertoire of proteins, the ability to bind exogenous heparin may significantly increase the potential for host-parasite interactions at the site of colonization. Host molecules known to interact with heparin include ECM components, such as fibronectin and vitronectin, and cytokines and inflammatory mediators (13). Thus, the ability of M. hyopneumoniae to bind heparin may have important implications with respect to modulation of the host immune system and inflammatory response in addition to adherence of the pathogen to host tissues.
We are grateful for the skillful assistance of Katrina Stewart in cloning fragments F2P97, F3P97, and F4P97.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»