Previous Article | Next Article ![]()
Infection and Immunity, March 2006, p. 1777-1785, Vol. 74, No. 3
0019-9567/06/$08.00+0 doi:10.1128/IAI.74.3.1777-1785.2006
Copyright © 2006, American Society for Microbiology. All Rights Reserved.
Department of Pathobiology and Veterinary Science,1 Center of Excellence for Vaccine Research, The University of Connecticut, 61 North Eagleville Rd., Storrs, Connecticut 06269,2 The Institute for Genomic Research, 9712 Medical Center Dr., Rockville, Maryland 208503
Received 2 November 2005/ Returned for modification 16 November 2005/ Accepted 19 November 2005
|
|
|---|
|
|
|---|
The virulence of strain R has been previously examined by comparing the virulent, low-passage strain (Rlow) with the attenuated, high-passage strain (Rhigh) (29). Initial examination of the protein profiles of Rlow and Rhigh indicated that three proteins were absent in Rhigh. These proteins have been identified as the primary cytadhesin GapA, the cytadherence-related molecule CrmA, and a high-affinity transport protein, HatA (29, 44). Complementation experiments with Rhigh using wild-type gapA and crmA demonstrated that coexpression of GapA and CrmA is essential for cytadherence in M. gallisepticum (27); however, these attachment molecules were not able to completely restore virulence, suggesting that additional differences contribute to the attenuation of the high-passage isolate.
With this in mind, we more closely examined the protein profiles of Rlow and Rhigh and found that, in addition to GapA, CrmA, and HatA, Rhigh is deficient in two high-molecular-mass proteins and expresses an aberrant form of a third protein. We identify two of these proteins as being encoded by MGA_0928 and MGA_1199 and characterize these as homologues of the M. pneumoniae tip structure proteins, HMW3 and P65, respectively. In accordance with standard nomenclature, we henceforth refer to these proteins of M. gallisepticum as HMW3-like protein (Hlp3) and pneumoniae-like protein A (PlpA).
The third protein was identified as the extracellular matrix protein fibronectin, which led us to believe that M. gallisepticum Rlow was capable of binding fibronectin from the growth medium and that one or both of the high-molecular-mass proteins Hlp3 and PlpA were responsible for this binding. Many pathogens, including M. pneumoniae (7), are known to bind components of the extracellular matrix for various reasons. Some bacteria utilize this ability to evade the immune system of their host (9), to mediate cytadherence (41, 42), to initiate biofilm formation (13, 37), or to attach to and invade host cells (8, 26, 34, 38, 40). In addition to these activities by bacteria, fibronectin binding has been shown to play a role in the hematogenous spread of cancer cells (4, 46).
We present below the identification of two proteins believed to be involved in cytoskeletal and tip structure formation and demonstrate their roles in fibronectin binding. In the absence of classical transmembrane domains, we present evidence to suggest that PlpA utilizes atypical domains to anchor itself within the membrane. Although the current study does not formally address the role of fibronectin binding in the virulence of Rlow, the ability to bind fibronectin is advantageous to other pathogens and thus can be considered a potential component of virulence in Rlow.
|
|
|---|
(Invitrogen, Carlsbad, CA) was grown in LB broth containing 50-µg/ml ampicillin at 37°C. SDS-PAGE and peptide sequencing. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) was performed as described by Laemmli (21). Proteins were extracted by Triton X-114 phase partitioning as described by Bordier (3). Triton X-114-insoluble proteins were solubilized in 10% sodium dodecyl sulfate. All protein phases were stored at 20°C prior to separation in 5% polyacrylamide gels. Proteins found to be present in Rlow and absent in Rhigh were subjected to in-gel digestion and matrix-assisted laser desorption ionization-mass spectrometry (MALDI-MS) analysis (14) (Molecular Structure Facility, University of California, Davis, CA). The resulting amino acid data were aligned with the M. gallisepticum strain R proteome using the FastA program (31).
Generation of antisera. Peptides were designed for the generation of antisera against PlpA and Hlp3 (see below). These peptides were synthesized and conjugated to keyhole limpet hemocyanin (KLH) (Sigma-Genosys, The Woodlands, Tex.). Peptides-KLH conjugates were coupled with complete Freund's adjuvant and used to immunize New Zealand White rabbits. Rabbits were boosted with KLH-conjugated peptide in the presence of incomplete Freund's adjuvant at 2-week intervals. After 8 weeks, rabbits were exsanguinated, and the sera were separated and stored at 80°C. The process of generating antisera was performed in its entirety by Sigma-Genosys.
Western blots. Triton X-114-insoluble phase proteins from M. gallisepticum were separated by SDS-PAGE and transferred to nitrocellulose membranes (43). Membranes were blocked with 5% bovine serum albumin or skim milk for 1 h at 37°C. Membranes were then reacted with primary antibody, either rabbit anti-fibronectin (Rockland Immunochemicals, Gilbertsville, PA), rabbit anti-PlpA, or rabbit anti-HMW3 (47) (kindly provided by Duncan Krause, The University of Georgia, Athens, GA) at dilutions of 1:8,000, 1:1,000, and 1:5,000, respectively, and incubated for 12 h at 4°C. Horseradish peroxidase-conjugated goat anti-rabbit immunoglobulin G (IgG) (Kirkegaard and Perry Laboratories, Gaithersburg, MD) was added at a dilution of 1:7,000 and incubated for 2 h at 37°C. Blots were developed with the 4-chloro-1-naphthol-hydrogen peroxide chromogenic substrate.
Nucleic acid extraction. Genomic DNA was isolated from Rlow and Rhigh using the Easy DNA kit (Invitrogen) according to the manufacturer's instructions. RNA was extracted from Rlow and Rhigh with TRIzol reagent (Invitrogen) according to the manufacturer's instructions and stored in 5-µg aliquots at 70°C. Aliquots of RNA were thawed as needed and treated with DNase I (Invitrogen) according to the manufacturer's instructions.
PCR conditions. PCR amplifications of plpA and hlp3 were performed using the Expand Hi Fidelity PCR System (Roche Applied Science, Indianapolis, IN) according to the manufacturer's specifications. Each PCR contained 100 ng genomic DNA and dinucleotide triphosphates at a final concentration of 200 µM. Primers SG1083 and SG1084 (hlp3) and SG1182 and SG1183 (plpA) (MWG Biotech, Raleigh, NC) (Table 1) were used at a final concentration of 10 µM. Initial denaturation of DNA was accomplished at 94°C for 2 min. Initial amplification was achieved by 10 cycles of the following: denaturation at 94°C for 20 s, primer annealing at 48°C for 30 s, and extension at 71°C for 5 min. Twenty additional cycles were performed, during which 5 s per cycle was added to the extension time. A final extension of 10 min was performed at 71°C.
|
View this table: [in a new window] |
TABLE 1. Primer sequences and descriptions
|
Transcriptional analysis by RT-PCR. Transcriptional analysis was performed by reverse transcriptase PCR (RT-PCR) using 1.7 µg RNA per reaction mixture. Amplifications were performed using the SuperScript RT-PCR kit (Invitrogen) according to the manufacturer's instructions. Reverse transcription was accomplished by incubation of RNA in SuperScript reaction mixture at 50°C for 25 min. cDNA was denatured for 2 min at 94°C and then amplified by 35 cycles of the following parameters: denaturation at 94°C for 20 s, primer annealing at 49°C for 30 s, and extension at 72°C for 1 min. A final extension of 10 min was performed at 72°C. A 500-bp fragment from the 3' end of hlp3 was amplified using the primers SG1090.5 and SG1097 (Table 1). A 250-bp fragment was amplified from the 3' end of plpA using primers SG1187 and SG1188 (Table 1). RNA was examined for DNA contamination by substituting AmpliTaq DNA polymerase (Applied BioSystems) for the SuperScript Platinum Taq under identical amplification conditions.
Peptide design and generation. Kyte-Doolittle hydrophobicity plots (20) were used to identify antigenic peptides (Table 2) from the protein sequences of PlpA and Hlp3 for the generation of antisera (Sigma-Genosys). Protein sequence alignments between PlpA, Hlp3, and annotated fibronectin-binding proteins (e.g., GenBank accession numbers ZP_00144610, CAA44726, NP_801368, NP_764439, A41461, B64235, AAP10794, and BAB81553) were performed using AlignX Blocks (InforMax/Invitrogen). Peptides representing the most homologous regions (see Fig. 4B) were generated by the American Peptide Company (San Francisco, CA). Peptides representing the membrane protein-associated motifs GG4 (GxxxG), II4 (IxxxI), an expanded motif of GG4 (GxxxGxxxG) as it appears in PlpA, and control peptides were generated by Sigma-Genosys. The N-terminal residue of each peptide was labeled with biotin.
|
View this table: [in a new window] |
TABLE 2. Peptide sequencesa
|
![]() View larger version (29K): [in a new window] |
FIG. 4. Suspected fibronectin-binding peptides. (A) AlignX Blocks was used to define homologous regions between PlpA, Hlp3, and known fibronectin-binding proteins. (B) Peptides derived from the most homologous regions of each block are shown. Peptides shown to bind fibronectin are displayed in red. (C) Peptides 1 (Hlp3) and 7 (PlpA) are aligned. Identical amino acids are shown in red, similar amino acids are shown in purple, and dissimilar amino acids are shown in blue. These peptides, each shown to bind fibronectin, are 60% identical and 80% similar.
|
Binding inhibition assay. IgG molecules were separated from other serum components of anti-PlpA antiserum and normal rabbit serum using the ImmunoPure Protein G column (Pierce, Rockford, IL) according to the manufacturer's instructions. Four micrograms of bovine fibronectin (Calbiochem) was placed into each well of a 96-well polystyrene microtiter plate (Immulon 4HBX; Thermo Electron Corporation, Milford, MA) and incubated at 37°C for 1 h. All wells were blocked with 5% bovine serum albumin for 1 h at 37°C. Mycoplasma gallisepticum Rlow cells from 1 ml of a mid-log-phase culture were harvested by centrifugation (15,000 x g for 10 min) and washed three times in phosphate-buffered saline. Solutions containing 107 CFU, 105 CFU, and 103 CFU were preincubated for 1 h at 37°C with 3 µg of either anti-PlpA IgG or normal rabbit serum IgG, added to fibronectin-coated wells, and incubated for 1 h at 37°C. Unbound cells were removed by being washed three times with PBS-0.005% Tween 20. Bound organisms were detected by incubation with chicken anti-M. gallisepticum at a dilution of 1:5,000, followed by horseradish peroxidase-conjugated goat anti-chicken (Kirkegaard and Perry Laboratories) at a dilution of 1:2,000. Peroxidase activity was visualized by the addition of phosphate-citrate buffer containing hydrogen peroxide and o-phenylenediamine. Absorbance was measured at 460 nm. Statistical significance was determined by Student's t test using the SAS statistical analysis program, version 8.01 (SAS Institute, Cary, NC).
Surface proteolysis assay. Eight 2-ml aliquots of an Rlow mid-log-phase culture were harvested by centrifugation (15,000 x g for 10 min) and washed three times with PBS. Five of the pellets were each exposed to 7.0 µg of proteinase K (QIAGEN, Inc., Valencia, CA) at 42°C for intervals of 15, 30, 45, 60, or 300 s. After incubation, proteinase K activity was inhibited by the addition of phenylmethylsulfonyl fluoride (PMSF) to a final concentration of 10 mM. The sixth pellet was resuspended in 0.1% Triton X-114 (to allow for the degradation of all protein) and incubated with proteinase K for 300 s prior to the addition of PMSF. The seventh pellet was simultaneously exposed to proteinase K and PMSF to neutralize any proteolytic activity and to serve as a zero time point. The eighth cell pellet was left untreated. Proteins from the eight cell pellets were then separated by SDS-PAGE and Western blotted as described above with anti-PlpA serum.
Growth inhibition by complement-mediated lysis.
Mycoplasma gallisepticum Rlow and Rhigh cultures (approximately 108 cells) were pelleted and washed three times with PBS. Cell pellets were resuspended in a solution of 75% guinea pig serum (serving as a source of complement components), 12.5% hyperimmune rabbit serum raised against the PlpA midsection (MID) peptide (Table 2), and 12.5% hyperimmune rabbit serum raised against the PlpA carboxy-terminal (CTD) peptide (Table 2). One Rlow cell pellet was resuspended in 100% guinea pig serum to serve as a standard for comparison. Cells in serum suspensions were gently shaken in an orbital incubator at 50 rpm for a period of 2 h at 37°C. Complete Hayflick's medium was added to the suspension, and cells were incubated for 24 h at 37°C. Following incubation, optical density measurements were taken (
= 620 nm). Cell growth was considered an indication of viability and therefore a lack of complement-mediated lysis; cell growth was assessed by a positive change in optical density. Statistical significance was determined by analysis of variance using the SAS statistical analysis program, version 8.01 (SAS Institute).
Peptide incorporation into liposomes. Liposomes were generated according to the method of Avanti Polar Lipids as originally developed by Morrissey (25). Briefly, a solution of 32.5 mM phosphatidylcholine-chloroform, 32.5 mM phosphatidylethanolamine-chloroform, and 12.4 mM phosphatidylserine-chloroform (40:40:20 molar ratio) (Avanti Polar Lipids, Alabaster, AL) was generated in the presence of 100 µg of each membrane-associated peptide (i.e., GxxxG, IxxxI, and GxxxGxxxG [in dimethyl sulfoxide] and controls [in water]). Dry nitrogen gas was used to evaporate the chloroform-water supernatant. Liposomes were further dried under a vacuum for 60 min at 30°C, then washed three times with PBS, and incubated in 2-µg/ml horseradish-peroxidase-conjugated streptavidin (Pierce) for 12 h at 4°C. Following incubation, liposomes were washed three times with PBS, then dissolved in chloroform, and immobilized on paraffin wax for visualization of signal. Bound streptavidin was visualized by development in the 4-chloro-1-naphthol-hydrogen peroxide chromogenic substrate.
Embedding of peptides into M. gallisepticum cell membranes. Mycoplasma gallisepticum Rlow cells were made electrocompetent as previously described (28), mixed with 100 µg of each membrane-associated peptide in a 0.1-mm cuvette (Bio-Rad, Hercules, CA), and electroporated at 2.5 kV (GenePulser II; Bio-Rad). Nonpulsed controls for each peptide were also included to exclude the possibility of peptides binding the cell surface nonspecifically. Cells were allowed to recover for 120 min in Hayflick's medium at 37°C. Cells were washed three times with PBS, resuspended in 25 µl PBS, and spotted onto nitrocellulose membranes. Membranes were blocked with 5% dry milk in water for 1 h at 37°C and incubated in horseradish peroxidase-conjugated streptavidin for 12 h at 4°C. Bound streptavidin was visualized by development in the 4-chloro-1-naphthol-hydrogen peroxide chromogenic substrate.
|
|
|---|
![]() View larger version (30K): [in a new window] |
FIG. 1. Protein profiles of Rlow and Rhigh analyzed by SDS-PAGE and Western blotting. SDS-PAGE (A, B, and C) and Western blotting (D, E, and F) demonstrate that three proteins were clearly absent (A, C, D, and F) or aberrant (D and E) in Rhigh. Arrows indicate the presence or absence of the implicated proteins, and pertinent molecular masses are noted. Western blot analysis was performed with anti-fibronectin (D), anti-HMW3 (E), and anti-PlpA (F).
|
![]() View larger version (13K): [in a new window] |
FIG. 2. Sample peptide alignments. (A) Peptides generated from MALDI-MS analysis of the 158-kDa band aligned with PlpA. (B and C) Peptides generated from the 200-kDa band aligned with Hlp3 or with fibronectin.
|
Nucleotide sequencing of hlp3 and plpA. Nucleotide sequencing of hlp3 from Rhigh showed a 54-bp deletion at base 816 of 3252 (Fig. 3A). Nucleotide sequencing of plpA from Rhigh showed a 17-bp insertion at base 2070 of 2568 that results in a frameshift mutation and subsequently a premature stop codon at base 2206 of 2568 (Fig. 3B).
![]() View larger version (14K): [in a new window] |
FIG. 3. Nucleotide sequencing of hlp3 and plpA. (A) A 54-bp deletion occurs in hlp3 in Rhigh. (B) A duplication of 17 bp occurs in plpA in Rhigh.
|
Peptide-binding assays. Peptides 1 (Hlp3) and 7 (PlpA) (Fig. 4B) were shown to bind immobilized fibronectin (Fig. 5A and B). The strongest interaction was between fibronectin and peptide 7. Amino acid comparisons of peptides 1 and 7 demonstrate 60% identity and 80% similarity (Fig. 4C). Peptide 7 was shown to bind the gelatin/heparin-binding domain of fibronectin (Fig. 5C).
|
View larger version (8K): [in a new window] |
FIG. 5. Peptide-binding assays. Biotinylated peptides from the homologous blocks were shown to bind fibronectin immobilized on nitrocellulose, as indicated by arrows. Peptide 1 from Hlp3 (A) and peptide 7 from PlpA (B) were both shown to bind. These peptides were 60% identical and 80% similar to each other. (C) Peptide 7 was exposed to immobilized subunits of fibronectin and shown to interact with the gelatin/heparin-binding domain. Lane 1, whole fibronectin; lane 2, fragment IIIC; lane 3, adhesion-promoting peptide; lane 4, residues 1377 to 1398; lane 5, gelatin/heparin-binding domain.
|
![]() View larger version (25K): [in a new window] |
FIG. 6. Binding inhibition assay to demonstrate surface exposure of PlpA. Decreasing titers of Rlow were incubated with preimmune rabbit serum IgG (stippled bars) and with anti-PlpA IgG (striped bars) and then exposed to immobilized fibronectin in microtiter plates. Bound organisms were detected by chicken anti-Rhigh, followed by horseradish peroxidase (HRP)-conjugated goat anti-chicken. At each titer, a significant difference (*) (P < 0.02) in the level of colorimetric signal (o-phenylenediamine) generated was observed.
|
Growth inhibition by complement-mediated lysis assay. Incubation of Rlow cells in anti-PlpA serum in the presence of complement components significantly (P < 0.004) inhibited their growth upon incubation in Hayflick's medium compared to Rlow cells incubated in complement components alone (Fig. 7). This inhibition of growth was considered an indication of complement-mediated lysis.
![]() View larger version (34K): [in a new window] |
FIG. 7. Growth inhibition by complement-mediated lysis. Rlow cells were incubated in the presence of hyperimmune rabbit serum raised against the MID and CTD of PlpA and guinea pig serum or in guinea pig serum alone. Following incubation at 37°C, Hayflick's medium was added. Growth of Rlow was assessed by optical density after 24 h. Incubation in the presence of complement components and anti-PlpA antiserum significantly (P < 0.004) impeded the subsequent growth of Rlow (spotted bars) compared to the growth of Rhigh (striped bars) incubated in the presence of anti-PlpA antiserum and complement components or Rlow (stippled bars) incubated in the presence of complement components alone.
|
![]() View larger version (9K): [in a new window] |
FIG. 8. Investigation of putative transmembrane regions of PlpA. GxxxG (GG4), IxxxI (II4), and GxxxGxxxG (GG4E) motifs from PlpA were examined for their abilities to interact with membranes. Liposomes were generated in the presence of biotinylated peptides representing these motifs. Excess peptide was removed by washing. Liposomes were immobilized on paraffin wax, after which incorporated peptides were detected with streptavidin-HRP. (A) Empty liposomes, the hydrophilic peptide (PlpA), the GG4 peptide, and the II4 peptide did not show any reactivity, indicating that no peptide was incorporated during synthesis. The ponticulin peptide and the expanded motif of GG4 did show reactivity (arrows), indicating that they were incorporated into the liposomes. In addition, biotinylated peptides were introduced into the membrane of M. gallisepticum by electroporation. Resulting cells were spotted onto nitrocellulose for the detection of embedded peptide by streptavidin-HRP. (B) Panels are labeled with the name of each peptide; those marked with a plus sign represent electroporated cells used to detect embedding, and those marked with a minus sign represent nonpulsed cells mixed with peptides to detect nonspecific binding. The hydrophilic peptide (PlpA), the GG4 peptide, and the II4 peptide did not embed in the membrane or bind to it nonspecifically. The ponticulin peptide embedded in the membrane but also bound the cell surface nonspecifically. The expanded repeat of GG4 embedded in the cell membrane and did not bind nonspecifically.
|
|
|
|---|
Amino acid sequence data for the 200-kDa band present in Rlow but not Rhigh identified both Hlp3 and fibronectin. Hlp3 (with an observed molecular mass of 175 kDa) bound to a fibronectin monomer (with an observed molecular mass of 200 kDa) would be expected to run at approximately 375 kDa in SDS-PAGE. Therefore, the observed size of 200 kDa for the bound complex of Hlp3 and fibronectin may possibly be due to fragments of fibronectin being bound to full-length Hlp3, fragments of Hlp3 being bound to a complete fibronectin monomer, or fragments of both proteins creating a smaller-than-expected protein complex. We have not yet explored the phenomenon of these two proteins existing in what appears to be a complexed state in a denaturing gel; however, these fortuitous observations led us to further investigate the fibronectin-binding capabilities of M. gallisepticum. Due to the observed homology between Hlp3 and PlpA, as well as the absence of PlpA from Rhigh, the fibronectin-binding capabilities of both Hlp3 and PlpA are described in this paper.
The presence of fibronectin and PlpA in the protein profile of Rlow (as well as their absence from the protein profile of Rhigh) was confirmed by Western blotting. While Rhigh expresses a form of Hlp3 that reacts with anti-HMW3 antiserum, the reaction is not as strong as that observed for Rlow. This indicates that Hlp3 in Rhigh is aberrant in both molecular mass and in relative abundance compared to Rlow.
Nucleotide sequencing of hlp3 and plpA indicates that both genes are disrupted in Rhigh. The disruption of hlp3 is an in-frame deletion resulting in the removal of 18 amino acids from the protein product. This deletion is likely responsible for the altered mobility of Hlp3 in Rhigh. It is noteworthy that this deletion encompasses a large portion of sequence encoding peptide 1, an amino acid stretch shown to bind fibronectin. The 17-bp duplication in plpA disrupts the reading frame and results in a premature truncation. This defect would affect only the C-terminal portion of the protein product; however, the visual absence of PlpA when examined by SDS-PAGE, as well as the lack of reactivity in Rhigh to antibodies targeting peptides at both the MID and C-terminal regions of PlpA, indicates that neither truncated nor full-length PlpA protein is present in Rhigh. Despite the lack of translated product, transcriptional analysis demonstrated that Rlow and Rhigh produce mRNA for both hlp3 and plpA. This indicates that a dysfunction at the translational or posttranslational level is responsible for the reduction and absence of Hlp3 and PlpA, respectively, in Rhigh. Reasons for the apparent instability of PlpA are currently under investigation.
Two peptides selected from regions aligning most closely with annotated fibronectin-binding proteins, one from Hlp3 and one from PlpA, were shown to bind fibronectin in vitro. Peptides 1 and 7 are 60% identical and 80% similar to each other (Fig. 4C). As there is a difference in the reaction intensity of each peptide with fibronectin, the critical residues for these interactions likely include one or more of the similar amino acids.
The current model describing the topology of the proteins comprising the attachment organelle of M. pneumoniae indicates that HMW3 is intracellular (39), while the cytadherence-associated protein P65 is surface exposed (32). The M. gallisepticum counterparts of these proteins have been implicated in a function that would largely necessitate an extracellular location. We demonstrate that anti-PlpA IgG inhibits binding of fibronectin by viable Rlow, supporting the predictions that PlpA has an extracellular location and that it binds fibronectin. The degradation of PlpA when whole Rlow cells are exposed to proteinase K, as well as the ability of anti-PlpA antibodies to bind Rlow and fix complement, thereby inhibiting growth, provides further evidence of the surface-exposed location of PlpA. Due to the degree of homology that Hlp3 and PlpA share, particularly in the suspected fibronectin-binding domains, we propose that PlpA is responsible for in vivo binding of fibronectin and that the in vitro binding by Hlp3 may be incidental to the homology between the two proteins within the suspected binding domain. These conclusions are further supported by the observation that the predicted fibronectin-binding domain of PlpA (peptide 7) exhibits a stronger interaction with fibronectin than that of the Hlp3 fibronectin-binding domain (peptide 1) and fibronectin. Analogous experiments analyzing the topology of Hlp3 were inconclusive (data not shown); therefore, definitive statements regarding the subcellular location of Hlp3 cannot be made at this time.
The observed topology of PlpA is not consistent with in silico analyses that indicate an intracellular location. Although an extracellular location of P65 has been described for M. pneumoniae (16, 32, 36), the mechanism by which it becomes surface exposed is unclear at this point. Neither P65 from M. pneumoniae or M. genitalium nor PlpA from M. gallisepticum possesses any classical transmembrane domains or signal peptides (10, 15, 28). The N terminus of PlpA does, however, possess features typical of membrane proteins, including 10 GG4 motifs (24, 28). The 10 GG4 motifs in PlpA occur as 5 expanded motifs (i.e., GxxxGxxxG), as is seen with the vacuolating toxin (VacA) of Helicobacter pylori. In the case of VacA, the expanded motif proved essential to interactions with other proteins on the surface of H. pylori (17).
We examined the possibility that an atypical transmembrane domain exists to facilitate the surface exposure of PlpA. The expanded motif of GG4 (GG4E) was targeted for investigation, due to its predicted properties in PlpA. In each of the five repeats in PlpA, five of the six variable residues are nonpolar. The predicted conformation of PlpA using GOR IV (11) indicates that all occurrences of the motif exist primarily as low-complexity regions (i.e., beta strands) between coiled-coil regions. If a stretch of sequence is not in an alpha-helical conformation, the predicted minimum number of amino acid residues required to span a cell membrane is six (30), making it theoretically possible for the GG4E peptide to completely traverse a cell membrane. This lack of secondary structure, in conjunction with the hydrophobicity of the sequence in that region, supports the notion that this motif is implicated in anchoring the protein in the cell membrane.
A peptide representing the expanded repeat of GG4 was shown to incorporate within liposomes and to embed within the M. gallisepticum membrane. Detection of this peptide in association with both liposomes and cell membranes represents embedding, rather than nonspecific binding. This is supported by the fact that GG4E peptides exposed to M. gallisepticum cells in the absence of an electrical pulse did not remain in association with the membrane following washes, indicating that this peptide does not bind the cell surface nonspecifically. The lack of positive signal in these experiments also indicates that the streptavidin conjugate alone does not bind the cell surface. Exposure of the streptavidin conjugate to unmodified liposomes eliminated the possibility of signal being generated due to nonspecific binding. The charged, phosphorylated head portions of each phospholipid molecule compose the surface of the liposomes and are therefore unlikely to directly bind peptides that are composed primarily of hydrophobic amino acids. The lack of binding by the hydrophobic II4 (IPVVI) and GG4 (GMLAG) peptides provides experimental evidence to support this.
In addition to PlpA, the M. pneumoniae protein PdhB (GenBank accession no. NP_110080) has been shown to be a surface-exposed fibronectin-binding protein, despite a lack of classical transmembrane domains (7). PdhB also possesses the expanded GG4 motif, wherein all of the variable residues are hydrophobic. These preliminary data indicate that these regions may be able to serve as atypical transmembrane regions. Further investigation of these motifs within the context of whole proteins will be necessary to gauge their potential as membrane-spanning regions.
The identification of PlpA and Hlp3 as fibronectin-binding proteins suggests that M. gallisepticum possesses additional mechanisms potentially associated with virulence that warrant further exploration. The nature of the disease state caused by M. gallisepticum is chronic, indicating that the organisms are accomplished at evading the immune system of their host. Although much of this evasion can be attributed to antigenic variation (2, 12, 22), it is possible that a secondary evasive mechanism exists. Evidence suggests that M. gallisepticum may enter epithelial cells and exist within them before rapidly exiting (48). In addition, M. gallisepticum has been isolated from several mucosal epithelial surfaces including the trachea, lungs, air sacs, sinuses, and ovaries, as well as nonmucosal epithelial surfaces such as the brain and arterial walls (5, 6, 49). The organism clearly has a mechanism(s) by which it travels from one tissue to another that has yet to be described. Fibronectin binding may play a role in the aforementioned activities, thereby contributing to the overall pathogenicity of the organism.
The fibronectin-binding domain of PlpA was shown to interact with the gelatin/heparin-binding domain of fibronectin. This domain is located on the CTD of the molecule, proximal to the site of interaction between fibronectin and integrins (35). Binding of PlpA to the gelatin/heparin-binding domain of fibronectin may allow M. gallisepticum to locate closer to the host cell surface, in proximity to the site of extracellular matrix-integrin interactions. PlpA, as the homologue of an M. pneumoniae cytoskeletal protein and a fibronectin-binding protein, is a potentially important component of the virulence of M. gallisepticum. Although the M. gallisepticum homologues of the M. pneumoniae tip structure proteins have not been investigated to date, these preliminary studies wherein PlpA and Hlp3 are absent or aberrant in an attenuated strain indicate that the generation of a comparative model of tip structure assembly may be beneficial to facilitating a more thorough understanding of the process of attachment.
This research was supported by USDA grant 58-1940-0-007.
|
|
|---|
5ß1. Cell. Microbiol. 1:101-117.[CrossRef][Medline]
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»