Previous Article | Next Article ![]()
Infection and Immunity, April 2006, p. 2453-2456, Vol. 74, No. 4
0019-9567/06/$08.00+0 doi:10.1128/IAI.74.4.2453-2456.2006
Copyright © 2006, American Society for Microbiology. All Rights Reserved.
Alan Basset,
and
Andrew Camilli*
Howard Hughes Medical Institute and Department of Molecular Biology and Microbiology, Tufts University School of Medicine, 136 Harrison Avenue, Boston, Massachusetts 02111
Received 5 November 2005/ Returned for modification 15 November 2005/ Accepted 16 January 2006
|
|
|---|
|
|
|---|
We sought to characterize the rlrA pathogenicity islet further for the following reasons: RrgA is a virulence factor in a murine lung infection model (8), yet the islet has a varied distribution among serotypes (18), and the RrgA, RrgB, and RrgC proteins exhibit homology to ones that were recently described to form pili in other gram-positive organisms (20-22). The most well-studied model of gram-positive pilus formation is Corynebacterium diphtheriae, where there are four motifs within the major pilin subunit, SpaA, that are necessary for pilus assembly. These motifs are an N-terminal signal peptide, a CWSS, a pilin motif, and an E-box motif (20-22). The identification and characterization of these motifs have led to a model of assembly wherein SpaA is polymerized into a pilus structure by covalent linkage between subunits catalyzed by the linked sortase, and the base of the pilus is covalently attached to the cell wall (20, 22). In addition, there appear to be minor subunit proteins that are incorporated along the pilus shaft and at the tip, one of which contains a variant CWSS. Incorporation of these minor subunits has been shown to require additional sortases that are also genetically linked; however, the mechanisms of their incorporation into the pilus are poorly understood. All four of the required motifs found in SpaA are present in RrgB, suggesting that the latter is the major subunit of a pilus in S. pneumoniae and that the other surface proteins and sortases in the islet are involved in pilus formation. Although a pilus has never been identified in S. pneumoniae, it has been previously reported in the literature that other streptococcal species, including S. parasanguis, S. salivarius, and S. sanguis, produce adhesive organelles such as fimbriae (6, 7, 13, 23-25), and it has recently been shown that S. agalactiae and S. pyogenes produce pili (12, 15).
To determine if RrgB forms a pilus structure analogous to that of SpaA, cell wall-anchored proteins were isolated from bacteria from the mid-exponential phase expressing a hemagglutinin (HA)-tagged RrgB (RrgB-HA) (inserted at residue 133) after cell wall digestion of whole cells with 10 mM Tris-HCl (pH 8.0), 30% raffinose, 100 U mutanolysin, 1 mg lysozyme, and EDTA-free protease inhibitor cocktail (Roche). The soluble molecules from this digest were separated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), and RrgB-HA was detected by Western blotting using a polyclonal anti-HA antibody (Santa Cruz Biotech). This analysis revealed multiple high-molecular-weight species of RrgB-HA, the majority of which are present in the stack of the gel (Fig. 1A), similar to that seen for SpaA in C. diphtheriae cell wall extracts. This ladder of bands is hypothesized to represent pili of various lengths that are composed of covalently linked major and minor pilin subunits (22). A similar banding pattern was observed for RrgA-HA (HA tag inserted at residue 224 to replace the nine amino acids at residues 224 to 232) (Fig. 1A) as well as for native RrgA immunoblotted with anti-RrgA polyclonal antiserum (Covance Research Products Inc.) (data not shown). The reduction in RrgB-HA signal relative to that for RrgA-HA was consistently observed by Western blotting, suggesting partial obscuring of HA epitopes or, alternatively, reduced assembly of this mutant protein into pili. These results suggest that the rlrA pathogenicity islet encodes a pilus similar to that described for C. diphtheriae. Furthermore, the similar banding patterns exhibited by RrgA and RrgB suggested two models: RrgA and RrgB are incorporated into a single multimeric pilus, or RrgB and RrgA form two independent pili. The absence of a consensus pilin motif and E box in RrgA favors the former hypothesis. To test these possibilities, we analyzed the migration of RrgA-HA by SDS-PAGE and Western blotting using cell wall preparations from double- and single-gene in-frame deletion strains,
rrgB
rrgC and
rrgC. We were unable to construct a deletion of rrgB by itself. RrgA-HA is undetectable in the cell wall fraction by Western blotting in the
rrgB
rrgC strain background, but the wild-type-like high-molecular-weight banding pattern is maintained in the
rrgC strain background (Fig. 1B). These data demonstrate a dependence of RrgA pilus formation on RrgB.
![]() View larger version (101K): [in a new window] |
FIG. 1. RrgA and RrgB are polymerized into pili. (A) Cell wall fractions of RrgA-HA and RrgB-HA S. pneumoniae TIGR4 form high-molecular-weight complexes when immunoblotted with anti-HA antisera. Wild-type (wt) TIGR4 (lane 1), RrgA-HA (lane 2), and RrgB-HA (lane 3) are shown. (B) The high-molecular-weight RrgA-HA complexes are not present in a strain with rrgB deleted and rrgC but are present when only rrgC is deleted. Wild-type TIGR4 (lane 1), RrgA-HA (lane 2), RrgA-HA rrgB rrgC (lane 3), and RrgA-HA rrgC (lane 4) strains are shown.
|
rrgB
rrgC strain (data not shown). Finally, the antiserum but not the preimmune serum recognized the RrgB peptides that were used to raise the antiserum (Fig. 2).
![]() View larger version (30K): [in a new window] |
FIG. 2. RrgB antiserum is specific to RrgB. (A) Two RrgB peptides were separated by SDS-PAGE, transferred onto a nitrocellulose membrane, and probed separately with mouse preimmune serum (lane 1) or mouse anti-RrgB serum (lane 2). The two RrgB peptides (filled arrow) and a breakdown product (open arrow) were detected by the antiserum.
|
rrgC strain was examined. RrgA-HA labeling in pili was observed (Fig. 3E), suggesting that RrgB is the pilin subunit, which is consistent with the Western blot results and the presence of pilin motifs in RrgB. The presence of both RrgA and RrgB in the same pilus structure was detected by double labeling with two different-sized gold particles (Fig. 3F and G).
![]() View larger version (81K): [in a new window] |
FIG. 3. Immunogold transmission electron microscopy visualization of RrgB and RrgA-HA incorporated into pilus-like structures on the surface of S. pneumoniae TIGR4. (A and B) Representative micrographs of TIGR4 labeled with mouse anti-RrgB antiserum and visualized with anti-mouse IgG Colloidal Gold 18-nm particles. (C to E) Representative micrographs of TIGR4 labeled with rabbit polyclonal anti-HA antibody and visualized with anti-rabbit IgG Colloidal Gold 12-nm particles. (C) RrgA-HA; (D) RrgA-HA rrgB rrgC; (E) RrgA-HA rrgC. (F and G) S. pneumoniae RrgA-HA labeled with both mouse anti-RrgB antiserum and anti-mouse IgG Colloidal Gold 18-nm particles as well as rabbit polyclonal anti-HA antibody and anti-rabbit IgG Colloidal Gold 12-nm particles. RrgA, labeled with 12-nm gold particles (arrows), is found periodically within the pilus. (H) TIGR4 labeled with mouse preimmune serum. Magnifications: (A) x10,500 (scale bar, 1 µm); (B, G, and H) x19,000 (scale bar, 1 µm); (C to F) x25,000 (scale bar, 0.5 µm).
|
Incorporation of RrgA into pili requires srtD. Due to the genetic linkage of rrgA, rrgB, and rrgC with srtB, srtC, and srtD, and the variant LPXTG motifs in each Rrg protein, we previously hypothesized that each sortase would direct the cell wall anchoring of one Rrg protein (8). To test this and to begin to analyze the mechanism of incorporation of RrgA into pili, the cell wall localization of RrgA was examined in previously described strains in which each sortase was mutated (8). Cell wall extracts were prepared from identical amounts of mid-exponential-phase bacteria and analyzed by Western blotting using rabbit anti-RrgA antiserum. The high-molecular-weight ladder of RrgA was absent in the cell wall fraction of the rrgA and srtD strains, whereas a wild-type banding pattern was observed in each of the other mutants (Fig. 4A). The srtD mutation did not affect the expression of RrgA, since RrgA was detected in large amounts in the protoplast and secreted fractions (data not shown). This result suggests that SrtD is required for the incorporation of RrgA into pili.
![]() View larger version (44K): [in a new window] |
FIG. 4. Incorporation of RrgA into pili requires SrtD. (A) Cell wall fractions of wild-type and sortase mutant strains were examined by Western blotting with polyclonal anti-RrgA antiserum. Fractions were from wild-type TIGR4 (lane 1) and strains carrying mutations in rrgA (lane 2), srtA (lane 3), srtB (lane 4), srtC (lane 5), and srtD (lane 6). (B) Schematic of the RrgA chimeras examined by Western blotting. RrgA (black arrow and rectangles) containing the C-terminal CWSS of each gene listed (arrowheads) is shown. The RrgA-RrgBCWSS chimera was generated by a suicide plasmid insertion-duplication mutation as illustrated. The integrated plasmid is a derivative of pAC1000 (9) containing rrgA' (bases 1 to 2586) joined to 'rrgB (bases 1902 to 1999). The RrgA-RrgCCWSS and RrgA-SP0082CWSS chimeras were generated by double-crossover allelic exchange using pAC1000 derivatives, resulting in the replacement of the 3' end of rrgA (bases 2586 to 2683) with 'rrgC (bases 1084 to 1150) and 'SP0082 (bases 2461 to 2574), respectively. (C) Western blots of the cell wall fractions of chimeric strains of AC1441, AC1442, and AC1443 in an otherwise-wild-type background (lane 1 in each panel) or in the sortase mutant backgrounds indicated above each lane. The cell wall fractions were immunoblotted with anti-RrgA polyclonal antibody. The intense band at approximately 120 kDa consists of two poorly resolved bands.
|
The above-described results suggest that RrgB and RrgC require other sortases (presumably SrtB and SrtC) for their incorporation into the cell wall compartment. To examine this, the sortase mutations used as described above were introduced into the RrgA chimeric strains by natural transformation, and cell wall extracts were analyzed by Western blotting as described above. Cell wall localization of RrgA-RrgBCWSS was greatly reduced in the srtB strain, whereas that of RrgA-RrgCCWSS was only moderately reduced in the srtC strain (Fig. 4C). Consistent with a previous report of canonical LPXTG-anchored proteins in S. pneumoniae (10), cell wall localization of the RrgA-SP0082CWSS chimera required srtA (Fig. 4C). Note that the absence of a high-molecular-weight banding pattern in these experiments is due to use of RrgA in these chimeras, which apparently is unable to be incorporated into pili by SrtA, SrtB, or SrtC. This is consistent with RrgA lacking the consensus pilin and E-box motifs. Cumulatively, these data indicate that there is a one-to-one sortase-to-surface-protein correspondence for gene products in the rlrA pathogenicity islet and further suggest that this relationship is essential for the formation of multisubunit pili on the cell surface.
To date, pili have been shown to be present in several gram-positive organisms. In this study, we show evidence of similar pili in S. pneumoniae TIGR4 encoded by the rlrA pathogenicity islet and additionally show that RrgA is incorporated into pili as a minor subunit in an SrtD-dependent manner.
Present address: Lymphocyte Biology Section, Brigham and Women's Hospital, Harvard Medical School, 1 Jimmy Fund Way, Boston, MA 02115. ![]()
Present address: Department of Infectious Disease, Children's Hospital, 300 Longwood Avenue, Boston, MA 02115. ![]()
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»