RrgA and RrgB Are Components of a Multisubunit Pilus Encoded by the Streptococcus pneumoniae rlrA Pathogenicity Islet

Visualization of a pilus structure on the surface of S. pneumoniae.

The conserved motifs found in RrgB, in addition to the Western blot data, led us to hypothesize that RrgB is the major pilus subunit. We sought to visualize a pilus structure by specifically looking at the RrgB protein via immunogold transmission electron microscopy. To this end, mouse antiserum raised against two peptides comprising the central portion of RrgB between the signal sequence and the C-terminal CWSS (N-terminal peptide at residues 44 to 341; C-terminal peptide at residues 343 to 624) was used. This antiserum was specific for RrgB, since it detected RrgB in cell wall extracts via Western analysis and did not recognize cell wall extract from an ΔrrgB ΔrrgC strain (data not shown). Finally, the antiserum but not the preimmune serum recognized the RrgB peptides that were used to raise the antiserum (Fig. 2).

• Open in new tab
• Download powerpoint

FIG. 2.

RrgB antiserum is specific to RrgB. (A) Two RrgB peptides were separated by SDS-PAGE, transferred onto a nitrocellulose membrane, and probed separately with mouse preimmune serum (lane 1) or mouse anti-RrgB serum (lane 2). The two RrgB peptides (filled arrow) and a breakdown product (open arrow) were detected by the antiserum.

Wild-type S. pneumoniae strain TIGR4 was incubated with mouse anti-RrgB serum, and bound antibody was visualized with 18-nm Colloidal Gold-AffiniPure anti-mouse immunoglobulin G (IgG) and negatively stained with uranyl acetate. The presence of numerous pili was detected on the surface of the bacteria (Fig. 3A and B). No labeling was observed with the mouse preimmune serum (Fig. 3H) or when the primary antibody was not used (data not shown). To test the hypothesis that RrgA is also incorporated into pili, wild-type S. pneumoniae and a strain expressing a second HA-tagged RrgA (HA inserted at residue 820 to replace the nine amino acids at residues 820 to 828) were incubated with rabbit anti-HA antibody and visualized with 12-nm Colloidal Gold-AffiniPure anti-rabbit IgG. RrgA-HA was detected within “patches” that were equally spaced along fibers, which are presumably pili (Fig. 3C). In the RrgA-HA background, if rrgB and rrgC are deleted, the pilus structure is not observed and the gold particles are seen close to the surface of the cell, indicating that RrgA-HA cannot be assembled into pili in the absence of RrgB and/or RrgC (Fig. 3D). To determine which of these two proteins is required for incorporation of RrgA-HA into pili, an RrgA-HA ΔrrgC strain was examined. RrgA-HA labeling in pili was observed (Fig. 3E), suggesting that RrgB is the pilin subunit, which is consistent with the Western blot results and the presence of pilin motifs in RrgB. The presence of both RrgA and RrgB in the same pilus structure was detected by double labeling with two different-sized gold particles (Fig. 3F and G).

• Open in new tab
• Download powerpoint

FIG. 3.

Immunogold transmission electron microscopy visualization of RrgB and RrgA-HA incorporated into pilus-like structures on the surface of S. pneumoniae TIGR4. (A and B) Representative micrographs of TIGR4 labeled with mouse anti-RrgB antiserum and visualized with anti-mouse IgG Colloidal Gold 18-nm particles. (C to E) Representative micrographs of TIGR4 labeled with rabbit polyclonal anti-HA antibody and visualized with anti-rabbit IgG Colloidal Gold 12-nm particles. (C) RrgA-HA; (D) RrgA-HA ΔrrgB ΔrrgC; (E) RrgA-HA ΔrrgC. (F and G) S. pneumoniae RrgA-HA labeled with both mouse anti-RrgB antiserum and anti-mouse IgG Colloidal Gold 18-nm particles as well as rabbit polyclonal anti-HA antibody and anti-rabbit IgG Colloidal Gold 12-nm particles. RrgA, labeled with 12-nm gold particles (arrows), is found periodically within the pilus. (H) TIGR4 labeled with mouse preimmune serum. Magnifications: (A) ×10,500 (scale bar, 1 μm); (B, G, and H) ×19,000 (scale bar, 1 μm); (C to F) ×25,000 (scale bar, 0.5 μm).

This is the first report where an external structure of this nature has been visualized on the surface of S. pneumoniae. These data, together with the Western blot and homology data, suggest that pili are assembled on the surface of S. pneumoniae TIGR4. RrgB is the major pilin subunit that forms the length of the pilus into which RrgA is incorporated as a minor subunit at periodic intervals. The precise locations of RrgA, RrgB, and possibly RrgC in the pilus are an interesting area of study, and the mechanism of their incorporation will require further investigation.

Incorporation of RrgA into pili requires srtD.

Due to the genetic linkage of rrgA, rrgB, and rrgC with srtB, srtC, and srtD, and the variant LPXTG motifs in each Rrg protein, we previously hypothesized that each sortase would direct the cell wall anchoring of one Rrg protein (8). To test this and to begin to analyze the mechanism of incorporation of RrgA into pili, the cell wall localization of RrgA was examined in previously described strains in which each sortase was mutated (8). Cell wall extracts were prepared from identical amounts of mid-exponential-phase bacteria and analyzed by Western blotting using rabbit anti-RrgA antiserum. The high-molecular-weight ladder of RrgA was absent in the cell wall fraction of the rrgA and srtD strains, whereas a wild-type banding pattern was observed in each of the other mutants (Fig. 4A). The srtD mutation did not affect the expression of RrgA, since RrgA was detected in large amounts in the protoplast and secreted fractions (data not shown). This result suggests that SrtD is required for the incorporation of RrgA into pili.

• Open in new tab
• Download powerpoint

FIG. 4.

Incorporation of RrgA into pili requires SrtD. (A) Cell wall fractions of wild-type and sortase mutant strains were examined by Western blotting with polyclonal anti-RrgA antiserum. Fractions were from wild-type TIGR4 (lane 1) and strains carrying mutations in rrgA (lane 2), srtA (lane 3), srtB (lane 4), srtC (lane 5), and srtD (lane 6). (B) Schematic of the RrgA chimeras examined by Western blotting. RrgA (black arrow and rectangles) containing the C-terminal CWSS of each gene listed (arrowheads) is shown. The RrgA-RrgB^CWSS chimera was generated by a suicide plasmid insertion-duplication mutation as illustrated. The integrated plasmid is a derivative of pAC1000 (9) containing rrgA′ (bases 1 to 2586) joined to ′rrgB (bases 1902 to 1999). The RrgA-RrgC^CWSS and RrgA-SP0082^CWSS chimeras were generated by double-crossover allelic exchange using pAC1000 derivatives, resulting in the replacement of the 3′ end of rrgA (bases 2586 to 2683) with ′rrgC (bases 1084 to 1150) and ′SP0082 (bases 2461 to 2574), respectively. (C) Western blots of the cell wall fractions of chimeric strains of AC1441, AC1442, and AC1443 in an otherwise-wild-type background (lane 1 in each panel) or in the sortase mutant backgrounds indicated above each lane. The cell wall fractions were immunoblotted with anti-RrgA polyclonal antibody. The intense band at approximately 120 kDa consists of two poorly resolved bands.

To confirm the specificity of SrtD for incorporating RrgA into pili, we replaced the CWSS of RrgA with that of RrgB and RrgC and examined the RrgA chimeras in strains deleted for individual sortases by Western blotting as described above. The chimeras contained the entire sorting signal of the indicated protein (from the first residue of the LPXTG motif to the end of the protein) in place of the analogous segment of RrgA (Fig. 4B). In addition, we created an RrgA chimera using a canonical (SrtA-recognized) LPXTG CWSS from an unrelated protein (SP0082). All three chimeras (RrgA-RrgB^CWSS, RrgA-RrgC^CWSS, and RrgA-SP0082^CWSS) were present in the cell wall fraction in the wild-type strain background (Fig. 4C); however, they were no longer present in the high-molecular-weight ladder exhibited by the wild type (compare Fig. 4A and C). Thus, although the chimeras are localized to the cell wall fraction, the wild-type RrgA CWSS is required for incorporation of the protein into pili in an SrtD-dependent manner.

The above-described results suggest that RrgB and RrgC require other sortases (presumably SrtB and SrtC) for their incorporation into the cell wall compartment. To examine this, the sortase mutations used as described above were introduced into the RrgA chimeric strains by natural transformation, and cell wall extracts were analyzed by Western blotting as described above. Cell wall localization of RrgA-RrgB^CWSS was greatly reduced in the srtB strain, whereas that of RrgA-RrgC^CWSS was only moderately reduced in the srtC strain (Fig. 4C). Consistent with a previous report of canonical LPXTG-anchored proteins in S. pneumoniae (10), cell wall localization of the RrgA-SP0082^CWSS chimera required srtA (Fig. 4C). Note that the absence of a high-molecular-weight banding pattern in these experiments is due to use of RrgA in these chimeras, which apparently is unable to be incorporated into pili by SrtA, SrtB, or SrtC. This is consistent with RrgA lacking the consensus pilin and E-box motifs. Cumulatively, these data indicate that there is a one-to-one sortase-to-surface-protein correspondence for gene products in the rlrA pathogenicity islet and further suggest that this relationship is essential for the formation of multisubunit pili on the cell surface.

To date, pili have been shown to be present in several gram-positive organisms. In this study, we show evidence of similar pili in S. pneumoniae TIGR4 encoded by the rlrA pathogenicity islet and additionally show that RrgA is incorporated into pili as a minor subunit in an SrtD-dependent manner.